O & M notes-snmp installation configuration,-snmp installation Configuration

O & M notes-snmp installation configuration,-snmp installation Configuration

In the new project, you need to enable the snmp service for the monitoring machine to collect data for monitoring when deploying the server. The requirements are as follows:

1. Specify a collection machine and another machine to collect data.

2. Specify the group name and read-only

The configuration is as follows)

1. # sec. name source communitycom2sec notConfigUserdefault public change the "comunity" field to the password to be set, that is, the group name (cannot use symbols, it will make an error) Change "default" to the ip address authorized for access
2. # Finally, grant the group read-only access to the systemview view. # group context sec. model sec. level prefix read write notifaccess notConfigGroup "" any noauth exact allnone none
3. ## incl/excl subtree maskview all supported ded. 1 80 remove comments
4. # Make at least snmpwalk-v 1 localhost-c public system fast again. # name incl/excl subtree mask (optional) view systemview encoded ded. 1.3.6.1.2.1.1view systemview added. 1.3.6.1.2.1.25.1.1view all supported ded. 1 add
5, #-or just the mib2 tree-view mib2 shortded .iso.org. dod. internet. mgmt. mib-2 fc remove comments

Test: snmpwalk-v 2c-c public serverIP ifpublic is the group name, serverIP is the ip of the monitored host, and if is the port information
How to Configure snmp for an IBM DS4700 Device

Use the Storage management software provided by the DS4700 disk array for configuration and management
This software should come with machines purchased. You can also download it from the IBM website.
Install the software on your console or laptop and connect it to the storage using a network cable. Change the console IP address to the IP address segment of 192.168.128. ###. The management IP address of DS4700 is 192.168.128.101. After you PING the IP address, you can run Storage Managerment.
. For more information, see the IBM 800 service hotline.
 
I want to buy a notebook. I am a junior O & M engineer, but I can use vmware to open many VMS to perform experiments.

Hp (hp) DV6-6153TX (QG473PA) 15.6 inch laptop (i7-2670QM 8G 1 TB 2G dual display D engraved Bluetooth fingerprint camera W7) 6999

FUJITSU (FUJITSU) AH531B 15.6 inch laptop (i7-2620M 4G 750G 1G exclusive D engraved Bluetooth camera W7) 6999

Lenovo (Lenovo) Y570N-ISE 15.6 inch laptop (i7-2670QM 4G 750G dual display D engraved Bluetooth USB 7500 HDMI Win7)

Another suggestion is that, no matter what you buy, if you play a lot of VMS, we recommend large memory. The memory is cheap, and 8 GB memory is good. It is very easy to play with VM.