Photoshop adds fantasy transmission beams to images in the woods

The transmission beam is very suitable for the picture of the forest, the production of the time in two steps to complete: first of all, using clouds to the light position to increase the smoke effect, and then extract the forest part of the high light, to white after the motion blur filter blur to make the beam effect can be.

Original

Final effect

1. Before we start the tutorial, we first extract the leaky area at the top of the forest. Open the big picture of the material image, enter the channel panel, copy the blue channel, get the blue copy channel, the following figure.

< map 1>

2, select menu: Image > Application layer, parameter settings such as Figure 3, the effect is shown in Figure 4. This step quickly deepens the area of the dark part of the picture.

< map 2>

< map 3>

< map 4>

3, select menu: Image > Application layer, the value unchanged, the effect is shown in Figure 6.

< map 5>

< map 6>

4, press CTRL + M on the blue Copy channel adjustment curve, increase light and shade contrast, parameters and effect of the following figure.

< map 7>

< map 8>

5, with the Lasso tool to the top of the leaky area outside the selection, and then use the Paint bucket tool to fill the black, remove the selection after the following figure. This will get the white spot we need.

< map 9>

6, do not have to exit the channel, there is a small part of the need to deal with: the upper right corner of the two tree trunk dug out. Copy the green channel and get the green copy channel, as shown below.

< map 10>

7, select the menu: Image > Application image, parameter settings such as Figure 11, determine the results shown in Figure 12. This step separates the trunk from the background area.

< map 11>

< map 12>

8, press CTRL + I reverse phase, the effect of the following figure.

< map 13>

9, press CTRL + M to strengthen the green copy channel light and shade contrast, parameters and effect of the following figure.

< map 14>

< map 15>

10, select the Pen tool to hook up the two tree trunks, into the selection after the white brush the trunk part of the white point, to keep the selection, press CTRL + Shift + I reversed, and the paint bucket tool to fill the black, the effect of the elimination of the selection after the result is shown in Figure 17. Here the tree trunks do not have to be filled with white, and can keep portions of the light area on the right side black.

< map 16>

< map 17>

11, the channel part of the basic operation is completed, the following only need to call the selection can be. Point RGB Channel to return to the layer board, first to the picture to fine-tune the color and light.

Create an optional color adjustment layer for yellow, green, white, neutral color adjustment, parameters and effects as shown below.

< map 18>

< map 19>

< map 20>

< map 21>

< map 22>

Classification:

• PS Image Processing