For users of Photoshop software, talk about adding fantasy transmission beams to people in the woods.
1. Before we start the tutorial, we first extract the leaky area at the top of the forest. Open the big picture of the material image, enter the channel panel, copy the blue channel, get the blue copy channel, the following figure.
2, select menu: Image > Application layer, parameter settings such as Figure 3, the effect is shown in Figure 4. This step quickly deepens the area of the dark part of the picture.
3, select menu: Image > Application layer, the value unchanged, the effect is shown in Figure 6.
4, press CTRL + M on the blue Copy channel adjustment curve, increase light and shade contrast, parameters and effect of the following figure.
5, with the Lasso tool to the top of the leaky area outside the selection, and then use the Paint bucket tool to fill the black, remove the selection after the following figure. This will get the white spot we need.
6, do not have to exit the channel, there is a small part of the need to deal with: the upper right corner of the two tree trunk dug out. Copy the green channel and get the green copy channel, as shown below.
7, select the menu: Image > Application image, parameter settings such as Figure 11, determine the results shown in Figure 12. This step separates the trunk from the background area.
8, press CTRL + I reverse phase, the effect of the following figure.
9, press CTRL + M to strengthen the green copy channel light and shade contrast, parameters and effect of the following figure.
10, select the Pen tool to hook up the two tree trunks, into the selection after the white brush the trunk part of the white point, to keep the selection, press CTRL + Shift + I reversed, and the paint bucket tool to fill the black, the effect of the elimination of the selection after the result is shown in Figure 17. Here the tree trunks do not have to be filled with white, and can keep portions of the light area on the right side black.
11, the channel part of the basic operation is completed, the following only need to call the selection can be. Point RGB Channel to return to the layer board, first to the picture to fine-tune the color and light.
Create an optional color adjustment layer for yellow, green, white, neutral color adjustment, parameters and effects as shown below.
12, press CTRL + ALT + 2 to bring up the high light selection, press CTRL + Shift + I to select the dark selection, then create the curve adjustment layer, the RGB, red, green, blue channel adjustment, parameters and effects as shown below. This step deepens the dark part of the picture and increases the cool color.
13, press CTRL + J to adjust the current curve layer copy layer, the effect of the following figure.
14, create a new layer, press the letter key "D" before the background color back to the default black and white, and then select the menu: Filter > Render > Cloud, OK and then press CTRL + M to adjust the curve, increase the contrast of light and shade. Then change the blending mode to "color filter", the effect is as follows.
15, add layer mask to cloud layer, then with black and white gradient on the mask from the upper right corner only the lower left corner of the white to black linear gradient, the effect of the following figure.
16, enter the channel panel, press CTRL + LEFT mouse button click on the channel Panel green copy channel thumbnails loaded into the trunk part of the selection, as shown below.
17, point RGB Channel to return to the layer board, to keep the selection, in the cloud mask to fill the selection of black, the result of the elimination of the selection of the following figure.
18, create a color balance adjustment layer, the shadow, highlight adjustment, parameter settings such as Figure 30,31, determined to press CTRL + ALT + G to create a clipping mask, the effect is as shown in Figure 32. This step adds blue to the Cloud section.
19, enter the channel panel, press CTRL + LEFT mouse button click on the channel panel blue Copy channel, load the selection, the following figure.
20, keep the selection, point RGB channel to return to the layers board, a new layer, with the paint bucket tool fill white, the result of the elimination of the selection of the following figure.
21, select Menu: Filter > Blur > Motion blur, Parameters and effects as shown below.
22, press CTRL + J to copy the current layer 4, 5 layers, and then select these layers, merged into a layer.
23, add a layer mask, pull out the trunk part of the selection, the mask filled with black, after the elimination of the selection effect of the following figure.
24, the natural part of the beam with a low transparency black brush smear, if you feel that the beam is not bright enough, you can copy the current layer layer, the appropriate lower layer opacity, the effect of the following figure.
25, according to the needs of the picture appropriate soft treatment.
According to the light position, fine tune the local brightness of the character part, complete the final effect.
Okay, the above information is small made up to you photoshop this software users of the detailed to add a dream transmission beam in the forest to share the full content of the course, in general, first of all, using clouds to light the position of the lighting to increase the smoke effect; then extract the high light from the woods, Turn white with a motion blur filter blur to make the beam effect, so now you guys just go and try it.
