The material picture is very good, but the background part of the picture is a bit messy. When the color palette can be used to blur the background, the partially defective parts are slightly repaired. Then adjust to their favorite color can be.
Original
Final effect
1, open the material picture, create hue/saturation adjustment layer, the yellow, green adjustment, parameters and effects as shown below. This step adds yellow-green to the picture.
< map 1>
< map 2>
< map 3>
2, create curve adjustment layer, RGB, red, green, blue channel adjustment, parameter settings such as Figure 4-7, the effect is shown in Figure 8. This step increases the contrast of light and shade and adds blue to the dark part.
< map 4>
< map 5>
< map 6>
< map 7>
< map 8>
3, create an optional color adjustment layer, red, yellow, white to adjust, parameter settings such as Figure 9-11, the effect is shown in Figure 12. This step adds brown to the picture.
< map 9>
< map 10>
< map 11>
< map 12>
4. Create a new layer, draw the color of the grass with a straw, and then paint the pavement part with a less transparent canvas, as shown below.
< map 13>
5, press CTRL + ALT + 2 to call up the high light constituency, press CTRL + Shift + I to select the dark selection, and then create a curve adjustment layer, the RGB, red, green, blue channel adjustment, parameter settings such as Figure 14, determined to use a black brush to wipe out the middle part, the effect is shown in Figure 15.
< map 14>
< map 15>
6, create a new layer, press the letter key "D" before the background color back to the default black and white. Then select the menu: Filter > Render > Cloud, and then change the blending mode to "filter" and change the opacity to: 50%. Add a layer mask and use a black brush to wipe out the lighter parts of the garment, as shown below.
< map 16>
7, create a color balance adjustment layer, the shadow, highlight adjustment, parameter settings such as Figure 17,18, determined to press CTRL + ALT + G to create a clipping mask, the effect is as shown in Figure 19.
< map 17>
< map 18>
< map 19>
8, create an optional color adjustment layer, red, yellow, blue, white, neutral color adjustment, parameter settings such as Figure 20-24, the effect is shown in Figure 25. This step mainly turns the lawn color to orange red.
< map 20>
< map 21>
< map 22>
< map 23>
< map 24>
< map 25>
9, create a color balance adjustment layer, the shadow, highlight adjustments, parameters and effects of the following figure. This step adds light yellow to the picture's high light portion.
< map 26>
< map 27>
< map 28>
10, the creation of optional color adjustment layer, red, neutral, black adjustment, parameter settings such as Figure 29-31, the effect is shown in Figure 32. This step to the middle of the picture tone slightly darker.
< map 29>
< map 30>
< map 31>
< map 32>
11, create a new layer, press CTRL + ALT + Shift + E-stamped layer. Fuzzy tools are used to blur the selection of the following figure.
< map 33>
12, a new layer, stamped layer. Select menu: Filter > Blur > Motion blur, Angle set to 45 degrees, distance set to 150, after the blending mode is changed to "soft light", the opacity to: 30%, the effect of the following figure. This step of the picture to soften processing.
< map 34>
13, using the Lasso tool to select the selection shown in the following figure, feather 45 pixels, press CTRL + J to copy to the new layer, blending mode to "filter", the opacity to: 70%, the effect of the following figure.
< map 35>
14, create a color balance adjustment layer, the shadow, highlight adjustments, parameters and effects of the following figure. This step strengthens the picture's dark part and the high light color.
< map 36>
< map 37>
< map 38>
15, create an optional color adjustment layer, the blue, magenta adjustment, parameters and effects of the following figure. This step appropriately reduces the magenta in the picture.
< map 39>
< map 40>
< map 41>
Finally to the picture to add a little dark angle, to the character grinding skin, complete the final effect.
Category: