Pink is more sweet, the color of the idea is relatively simple. You can first pull the red main color, and then the red light, the high light part of a little green as a complementary.
Original
Final effect
1, open the material picture, create hue/saturation adjustment layer, the yellow, green adjustment, parameters and effects as shown below. This step quickly turns the main color of the picture into reddish brown.
< map 1>
< map 2>
< map 3>
2, press CTRL + ALT + 2 to bring up the high light selection, create a solid color adjustment layer, color set to light green: #D0EAD2, to determine the blending mode changed to "Darken", the opacity to: 30%, the effect of the following figure. This step adds a light green to the picture's high light portion.
< map 4>
3, create curve adjustment layer, to red, blue channel adjustment, parameter settings such as Figure 5,6, the effect is shown in Figure 7. This step adds red to the dark part of the picture.
< map 5>
< map 6>
< map 7>
4, press CTRL + J to adjust the current curve layer copy layer, the effect of the following figure.
< map 8>
5, create an optional color adjustment layer, red, magenta, white adjustment, parameter settings such as Figure 9-11, the effect is shown in Figure 12. This step of the picture in the red light a little, the high light part of the increase in light cyan.
< map 9>
< map 10>
< map 11>
< map 12>
6, press CTRL + J to copy the current optional color adjustment layer, the effect of the following figure.
< map 13>
7, the creation curve adjusts the layer, to the RGB, the blue channel adjusts, the parameter and the effect is as follows picture. This step is a little lighter than the main color of the picture.
< map 14>
< map 15>
Category: