The color of the material picture is relatively simple, when color matching can turn the main color directly to a more neutral color, and then in the dark to increase the blue purple, the local add a little orange red as a high light.
Original
Final effect
1, open the material picture, create hue/saturation adjustment layer, the whole map, yellow, green adjustment, parameter settings such as Figure 1-3, the effect is shown in Figure 4. This step properly reduces the saturation of the entire graph and reduces the brightness of the yellow.
< map 1>
< map 2>
< map 3>
< map 4>
2, create curve adjustment layer, RGB, red, green, blue channel adjustment, parameter settings such as Figure 5-8, the effect is shown in Figure 9. This step slightly strengthens the color of the picture's High light section.
< map 5>
< map 6>
< map 7>
< map 8>
< map 9>
3, create color balance adjustment layer, shadow, highlight adjustment, parameter settings such as Figure 10,11, the effect is shown in Figure 12. This step mainly adds light blue to the picture's High light section.
< map 10>
< map 11>
< map 12>
4, create hue/saturation adjustment layer, the yellow, green adjustment, parameters and effects of the following figure. This step mainly turns the yellow in the picture into neutral color and increases the brightness.
< map 13>
< map 14>
< map 15>
5, press CTRL + J to copy the current hue/saturation adjustment layer, the effect of the following figure.
< map 16>
6, create a color balance adjustment layer, the shadow, highlight adjustments, parameters and effects of the following figure. This step mainly adds blue to the dark part of the picture.
< map 17>
< map 18>
< map 19>
7, create curve adjustment layer, RGB, red, green, blue channel adjustment, parameter settings such as Figure 20-23, the effect is shown in Figure 24. This step adds a light blue to the picture's high light portion.
< map 20>
< map 21>
< map 22>
< map 23>
< map 24>
Classification: