PS Filter: How brush strokes are used

In today's tutorial, we'll share with you one of the PS built-in filters: brush strokes (English name: brushstrokes) this filter. If you love hand-painted design work, or want to learn the hand-drawn design of netizens, you need to use the brush strokes of this filter, so first take a look at this tutorial, do a simple introduction bar!

More filter usage, recommended reading: PS Built-in filter Encyclopedia

The brushstrokes (brush stroke) filter mainly simulates the painting effect created by using different brushes and inks for strokes. (Note: This type of filter cannot be applied in CMYK and lab mode)

1, Angledstrokes (angled line filter)

Function: Use angled lines to sketch images.

Adjust parameters:

Angled lines

Direction balance: Can adjust to the lower left corner and the lower right corner of the sketch strength.

Line Length: Controls the length of the angled line.

Sharpening degree: Adjusts the sharpening degree of the outline line.

Graphic effect:

2, spatter (Splash filter)

Function: Create a similar effect to view the image through the bathroom glass.

Adjust parameters:

Spray color radius: to form the radius of the splash color block.

Smoothness: The smoothness of the transition between the splash color blocks.

Graphic effect:

3, Sprayedstrokes (Spray color stroke filter)

Function: Uses the primary color of the selected image, and paints the image with a angled, splash-colored line, so the effect is similar to the splash filter.

Adjust parameters:

Line length: Adjusts the length of the sketched line.

Spray radius: The radius that forms the splash color block.

Stroke direction: Control the direction of spray color, there are four kinds of directions: vertical, horizontal, left diagonal and right diagonal.

Graphic effect:

4, Accentededges (Enhanced Edge Filter)

Function: The color boundary of the image is strengthened and the brightness of the edge is set up, and the brightness of the boundary is increased. Setting a lower edge brightness value will reduce the brightness of the boundary.

Adjust parameters:

PS Brush Stroke Filter

Edge width: Sets the width of the edge of the hardening.

Edge Brightness: Controls the brightness of the hardened edge.

Smoothness: Adjusts the edges that are hardened to make them smooth.

Graphic effect: