Resolution printer error: The operation cannot be completed (error 0x00000709 )., Printer 0x00000709
Solution: The operation cannot be completed (error 0x00000709 ). Check the printer name again and make sure the printer is connected...
At the same time in the morning, the network printer could not print, so first check whether the printing server IP address was changed, and the result was not changed.
Next, try to add the network printer again. The result is a problem and the printer cannot be connected. The prompt is:
The operation cannot be completed (error 0x00000709 ). Check the printer name again and make sure the printer is connected to the network. (Windows XP system machine prompt)
The operation cannot be completed. The entered printer name is incorrect, or the specified printer is not connected to the server. For more information, see help
Then I checked the information on the Internet. There are more than N statements. Let's see if the printer has been shared, modify the sharing name, reinstall the printer driver, start the Guest account, and close the firewall...
However, it is found that the network printer can be accessed through the machine name instead of the IP address, but it is not so easy to access through the machine name, my machine can be accessed, but I cannot access my colleague's machine (you can ping the machine name to test whether the machine can be accessed). As for the reason, this is complicated, no one said they didn't understand, and they didn't drill down.
Another solution on the Internet is not to directly access through IP addresses or machine names, but to "browse the printer", which was successfully accessed on my machine once, but then it won't work, and you won't be able to browse the printer.
After a whole morning, I finally found the final solution:
Restart the Print Spooler service on the server. This is easy!
[Control Panel-service-Print Spooler]
Recommended: http://www.cnblogs.com/roucheng/p/winformtj.html
Http://www.cnblogs.com/roucheng/p/jsliebiao.html