ROS IPsecVPN Point-to-end configuration tutorial
Network Structure: 1. the IPsec VPN Gateway is an ROS router. 2. ADSL is connected to the Internet, and DDNS (Domain Name: ros. ddns. name) 3. The IPsec VPN client uses the shrew VPN client (www.shrew.net) to configure IPsec and shrew client. For details, refer to the ROS IPsecVPN Point-to-site configuration. The key points are Peer and Proposals, for details, see. Auth. method Option 1. Pre shared key does not require user authentication. 2. pre shared key xauth extension authentication, username and password required 3. rsa key encryption key 4. rsa signature key authentication 5. rsa signature hybrid key authentication peer configuration Proposals Configuration Add Pool address Pool Mode config set address Pool add IPsecVPN User Password the above is the configuration of the IPsec VPN service. The Shrew Client configuration is as follows, for details, see all configuration steps: test: the remote server uses the Shrew Client to normally access the VPN gateway to normally access intranet resources. Conclusion: I learned a little about ROS IPsecVPN.