1. Set a fixed IP address. We can set a fixed IP address as follows.
Fixed IP settings in Windows XP
1. Right-click the network neighbor and click "properties ".
2. Right-click "local connection" and choose "properties"
3. Double-click "Internet protocol (TCP/IP )"
4. Select "use the following IP address" and "use the following DNS server address" ----> and enter 192.168.0.X (the value range of X is between 2 and. one) ----> fill in "255.255.255.0" after "subnet mask" ----> fill in the LAN port address of your router after the "default gateway" option ----> in "preferred DNS server address" and "backup DNS enter the DNS server address recorded in the running status of the vro.
Fixed IP settings in Windows 7
1. Right-click "network" and select "properties ".
2. Click "Change adapter settings"
3. Right-click "local connection", select "properties", select "Internet Protocol version 4 (TCP/IPv4)", and click "properties ".
4. Check "use the following IP address" and "use the following DNS server address" options ----> enter "192.168.0.X" after the "IP address" option (the value range of X is 2-254, any one in this range can) "---->" subnet mask "followed by" 255.255.255.0 "---->" default gateway "followed by your router's LAN port address ----> in" preferred DNS server address "and" backup DNS enter the DNS server address recorded in the running status of the vro ----> click OK ".
Fixed IP settings in Windows 8
1. Install the Windows buttons (the Ctrl key in the lower left corner of the keyboard and the Alt key in the middle) and the R buttons on the keyboard to open the running program interface.
2. In the running program, enter ncpa. cpl-> click "OK" (or press the Enter key on the drive)
3. Right-click "Ethernet" and choose "properties"> "Internet Protocol version 4 (TCP/IPv4) click "properties" (or double-click "Internet Protocol version 4 (TCP/IPv4 )").
4. Check "use the following IP address" and "use the following DNS server address" options ----> enter "192.168.0.X" after the "IP address" option (the value range of X is 2-254, any one in this range can) "---->" subnet mask "followed by" 255.255.255.0 "---->" default gateway "followed by your router's LAN port address ----> in" preferred DNS server address "and" backup DNS enter the DNS server address recorded in the running status of the vro ----> click OK ".
2. Delete the configuration file
Delete method: click the wireless signal icon in the lower-right corner of the computer, click Open Network and Sharing Center, find and click Manage wireless network. In the displayed network list, find the router signal, right-click it, and click delete network]
3. Confirm the Wireless name
Log on to the vrossid and check whether the password is correct. For details, click Wireless Settings> Basic settings to view the SSID.
4. Disable wireless MAC address filtering
Click Wireless Settings> wireless MAC address filtering to disable the wireless MAC address filtering function. As shown in the following figure:
5. Cancel wireless encryption
Click Wireless Settings> Wireless Security Settings, select do not enable wireless security, and then save> restart. As shown in the following figure: