Solution to red screen on Win10 system Surface tablet

Solution to red screen on Win10 system Surface tablet
A user of a Surface tablet is auditing the win10 system. After the system is started, a red screen is displayed. What is the problem? Today, I will introduce the solution to the red screen. This is also an uncommon computer fault. If you need it, you can learn it together!



Fault description:

After the system is installed, the Win10 System of the Surface flat turns red. Only the Surface text in the middle is black and white, and the rest is red.

Fault analysis:

This problem occurs because you have modified the default UEFI settings. At this time, you only need to restore these settings back to the default settings to restore the original black-white boot screen.

The specific solution to the red screen in win10 system is as follows: the method is applicable to all Microsoft Surface flat devices.

1. Press the power supply and volume buttons at the same time, and wait for the Surface sign to open the screen to enter the UEFI setting interface;

2. Set the Trusted Platform Module (TPM) to enabled );

3. Set the Secure Boot Control to enabled );

4. If the Install Default Secure Boot keys option appears under Secure Boot Control, select and confirm (OK) modification. In this step, the secure start key is restored to the default state. If this item is not displayed, it indicates that the current State is default and does not need to be modified.

5. Finally, select Exit setup to save the settings.

The above is the solution to blushing the boot screen of the Win10 system on the Surface panel. In fact, the boot screen of the Win10 system on the Surface Panel turns red only because of UEFI settings, you only need to reset the settings in UEFI to solve the problem. The method is as simple as this.