1. If this problem occurs, we need to set it in the BIOS of the computer. Press f12 or del when the computer starts up to enter the BIOS, and then on the BIOS interface shown below, select the Advanced menu, select the SATA Configuration option, and then press Enter;
2. In the window that appears in Windows 8, click press enter to open the SATA Mode Section option. The IDE and AHCI options are displayed, select IDE, and click press Enter;
3. After that, you can re-enter the PE system to read the hard disk.
Different BIOS have different access methods, which are usually displayed on the boot screen.
How to set BIOS for a common desktop PC:
Award BIOS: Press "Del"
Ami bios: Press "Del" or "ESC"
Phoenix BIOS: Press F2
How to configure BIOS for other brands:
Ibm (press f1 for cold boot, and some new models can start Press f1 for restart)
Hp (press f2 at startup and restart)
Sony (press f2 at startup and restart)
Dell (press f2 at startup and restart)
Acer (press f2 at startup and restart)
Toshiba (press esc during cold boot and then press f1)
Compaq)
Fujitsu (press f2 at startup and restart)
Most Chinese and Taiwan brands (f2 at startup and restart)
After this operation, you will find that the PE in the Win8 system cannot read the hard disk. I hope this tutorial will help you.