Teach you how to repair the computer hardware that is damaged by water

1, first of all your computer hardware is stained with water, the computer does not move, also do not shut down and boot, you in the boot and shutdown process, may also generate electricity, this will hurt to other equipment. Destroy the hardware on this computer.

2, after thinking about the water to dry, and then is not the hardware of the hard drive is contaminated with the words, it is best to say as much as possible to copy the above data, and then use some equipment, such as hair dryer to dry it, if the water is not a lot of words, with some detergent to clear off, with some absorbent things to absorb the water above, Of course it depends on your equipment to remove the water as quickly as possible.

3, because these hardware is the meaning of iron elements, if your water has not been cleared clean, it will be oxidized and rust corrosion situation. So remove the clean water as quickly as possible, so as to prevent the electronic components from being corroded. Then your hardware may be scrapped.

Like some computer hardware, it is possible to basically through the above operation, but many people will accidentally drop the phone in the water inside the case, fall in the water, so suggest you will first remove your battery, the moisture in time to clean out. Then bury your phone in your home's tank, and after a few days, you're taking it out to see if it's working properly.