Tengda (Tenda)-u1 XP system does not automatically connect WiFi how to solve?

Application Type: USB wireless network card Problem Classification: function realization

Problem Description: U1 on the system computer, using the network card mode with the UI, the power-on can not automatically connect, you need to manually enter a password before you can connect to the signal.

Problem reason: Some manufacturers wireless router in the factory default wireless encryption way for WPA/WPA2-PSK mixed encryption method caused. The workaround has the following three:

The first workaround :

Modify the wireless encryption method for the router as a fixed one. Because some manufacturers router default encryption mode for the mixed model, so modified to fixed WPA-PSK or, can be resolved;

The default encryption is as follows:

Modify to the following figure mode:

The second workaround :

Update The U1 network card driver to the new version, you can solve, the software has been uploaded to the official website;

The third solution :

Because the U1 and Windows own UI cannot be used at the same time, the system will not be able to use its own UI when it starts automatically with the UI. You can disable your own UI, such as disabling the U1 boot entry, and using windows with its own UI connection, you can enable automatic connection to the wireless signal.