The advantages of the centralized on-line mode of the wiring rack

The wiring frame centralized on-line means that the wiring frame horizontal equipment number and the vertical trunk cable serial number beforehand completes the jumper according to a certain proportion, through the program-controlled switchboard equipment number and the telephone number flexible soft connection, completes the installment, the shift machine, the change number, the test and so on business operation. This new mode of operation only one person through the computer operation can be completed before many people at the same time to complete the wiring rack jumper work. If the centralized on-line completion, the user installed, the investigation department as long as the telephone number and outside line order, the surveyor through the microcomputer operation, will telephone number and the corresponding equipment number soft connection, can complete the entire installation operation. If the focus on the way to the local telephone installed advantages are not too obvious, then, in the local call machine, change the number and engineering inverted line in the role of the obvious, these work only through the microcomputer soft connection can be completed, do not need surveyors to carry out large-scale jumper changes.

The advantage of the centralized on-line mode is obvious compared with the traditional operation mode.

First, the centralized line wiring rack jumper once completed, to avoid the traditional method of many times without the rules of the confusion caused by the jumper, so that the appearance of the wiring frame neat.

Second, the focus on the line can choose the shortest path near the jumper, just 2~3m can save a lot of jumpers. Traditional method jumper generally more than 10 meters, or even dozens of meters.

Third, in case of moving machines, changing numbers and engineering inverted line, the traditional method needs to be removed a large number of jumpers, heavy workload, wiring rack card contacts through multiple cards, will cause the card point relaxation. The use of centralized on-line mode can be completed by microcomputer operation, reducing the wear of the card contact, prolonging the life of the wiring frame, and reducing the occurrence of the obstacle.

Finally, the traditional method of testing the user line to be completed by hand, the use of centralized on-line mode can be used in the existing automated test system to test the remote station user line, so as to achieve unattended or less people on duty. The computer operation can be combined with "97 Engineering" microcomputer system to realize operation Automation by centralized on-line mode.