A lot of friends like to use U disk volume production, but the equivalent production failure that how to do? The following is to introduce a small tool-mptool, mass production errors on the use of it to repair it.
Let's take a look at its specific usage:
Automatic pop-up input Password box settings: Select information Settings, select CD-ROM in partition one setting, select Directory Autoplayautorun.iso in the ISO column,
In the second partition select Hide tick, access password by default set to 111, you can set up
Two. 6208 USB u disk You should choose the settings file: Settings-dev.dll
Three. 6208A common u disk and encryption u disk Select Settings file Settings_v3.dll, do not choose.
Four. Do file write protection (curing file), the file must be placed in the first partition, and the need to write the protection of files to replace the mass production tool directory
The Login.exe in the next Loginfiles folder.
Five. When the end user makes the encrypted partition to cooperate with the DISKTOOL_1220 version, therefore the Disktool in the CD material also should update accordingly.
The six. 1220 version adds support for Micro Mt29f16g08maa (50nm,4k/page).
Instructions for using the scan level of the mass production tool
1. For black/White (downgrade) FLASH, the scanning level should be at least 6, and the highest level is 11.
2. For the positive (the original positive is the bad block in the original specified range of 2%) can be used under level 5 to scan.
3.ECC open to U disk quality is risky. (the original is not recommended to open)
4. Choose the "New Flash original bad block tag format" will not destroy the previously scanned bad block table. For advanced formatting only.