(1) confirm the two-node time synchronization
Make sure that the time error between nodes is controlled within 5 minutes. Otherwise, the addition of nodes will not be completed.
(2) run the Add node command on node 1.
Host Name input: DM Host Name
Node 1: (To the ikerv01 path)
Command: addNodeWIN-PLDC49NNSAA 8879
(3) node 2: Execute the Add node command
Host Name input: DM server host name
Node 2 (to the ikerv01 path)
The command is addnodewin-pldc49nnsaa 8879.
(4) Restart DM
To dmgr path:
Execute Command: stopmanager -- disable DM
Execute Command: startmanager -- start DM
(5) Start each node server1
Node 1:
Run the command: Execute startserver server1 in the cmdrv01 path.
Node 2:
Run the command: Execute startserver server1 in the cmdrv01 path.
**************************************** ******************************** ****************
Original works, from "Deep Blue blog" blog, welcome to reprint, reprint please be sure to indicate the source (http://blog.csdn.net/huangyanlong ).
Please leave a message or email ([email protected]) indicating that the statement is incorrect. Thank you very much.
**************************************** ******************************** ****************
Was cluster series (9): cluster creation: Step 7: add nodes