Why and how the Wi-Fi wireless connection is not working

Wi-Fi wireless network is also our more common network. So for this fault, let's briefly introduce one, that is, Wi-Fi wireless connection is not a problem. Wireless network fault Many more than one, there are many "incurable diseases." So this article is mainly about Wi-Fi wireless connection is not the reason. Through six aspects, for everyone to analyze the reasons and solutions. I hope this article will help you solve the problem.

A radio disturbance

Radios may come from a wide range of consumer electronics, such as cordless phones, Bluetooth headsets, microwaves and even garage doors, which may interfere with Wi-Fi radio signals being worked properly.

Solution: Remove or stay away from these devices, and if the wireless signal is restored or strong, it can be explained that the source of the problem is found.

Second radiation deficiency

Even without other jamming devices, it is possible that the Wi-Fi network itself is not covered enough to cause wireless networks to be unstable. As you know, the link status of Wi-Fi network is closely related to the distance between terminal and AP.

Solution: Minimize the metal barriers that affect the link, or shorten the distance from the AP. A more feasible approach is to consider installing antennas for better wireless transmission.

Triple Link to error network

If you have 2 Wi-Fi networks with the same network name in your wireless network environment, you are likely to link to the wrong network and affect your normal Internet access. In this case, there are often signals that interfere with each other or the range of radiation is insufficient. In addition, if another network shuts down, it will also affect your computer on the Internet.

Four network drivers or firmware not upgraded in time

Each computer that links to Wi-Fi networks uses its built-in network modules and associated drivers to enable wireless Internet access. The driver affects the performance of the various functions of the Wi-Fi hardware. In addition, the wireless router and the firmware responsible for the access are the same as the driver, which affects the wireless internet function.

Workaround: Uninstall outdated drivers and firmware before downloading the latest version of the driver that installs the corresponding wireless module components in the official web site.

Five software is not compatible

If the computer from the beginning, there is no link to the wireless network, it is likely that your computer is installed running incompatible software. These software include operating system patches, operating system service components, or other software that affects the system network.

Solution: Record every time you upgrade or install the software, and uninstall the incompatible software, or simply make a system restore.

Six routers (access points) overloaded

It has been reported before that the overloading of routers or access points can affect the speed and quality of wireless Internet access. The main reasons for the overloading of routers are: Online games, bt download or the number of computers connected to the network too much, and so on. In theory, mass data transfer usually leads to temporary drop of routers. In addition, if the router's temperature is too high, it may also appear to fall off the line.

Solution: Install the router place, must have the good ventilated environment. If the router is not appropriate for the situation you are using (such as requiring a higher data transfer capability), consider replacing the router.