1, first installs the soft disc to pass UltraISO, then inserts you to make the U disk (if is uses the U disk to install the operating system, preferably is greater than 4G), then opens the software as "the Administrator".
2, after opening, and then in the red box below to find the folder you placed Win7 PE software, double-click the blue box you download to the Win7 PE version, so the black box will appear in the following picture information.
3, point "boot CD" inside the "write hard disk image", will pop up the following interface, suggested that the first point "format."
4, the point "Start" to start formatting, after the format of the point "write", will appear the next figure, and then point "yes".
5, and then wait for write finished when the "burn success" shows that you have successfully win7 PE software into the U disk, see Write a U disk, there are some god horse file it!
6, restart the computer, the power-on press "Delete" key, into the BIOS, with the keyboard key to move the red box to the third line "Advanced BIOS Features", and then press ENTER.
7, after entering the following figure, move the red box to the fifth line below the figure position, and then press ENTER.
8, in the bounce out of the interface, select "USB-HDD", and then press ENTER to confirm, then the completion of the USB is the first step to start. Press "F10" and select "Y" to save and exit the reboot.
9, after reboot, will appear in the following figure "Start USB device" prompts, that is, start your production of u disk.
10, Win7 PE virtual system into complete, look at the interface bar!
The interface has a lot of built-in software, such as Diskgenius, hard disk partition, data recovery, partition Table Recovery tool, and then look at the System Restore weapon: A key ghost, there are many other software is not one example! In this way, a win7pe made of the U disk started on the completion, quickly try it.