Windows cannot configure this wireless connection-Solution

If you cannot establish a wireless connection, troubleshoot the problem as follows.
1. to check whether the driver of the wireless network card is correctly installed, right-click "my computer" and choose "manage"> "Device Manager" in the left column-> "network adapter"-> Find the wireless network card, if the driver is incorrect, a yellow question mark will be prompted. At this time, you need to re-install the driver. You need to find a drive disk or a laptop to install the driver for the wireless network card.

2. if the wireless network card is not enabled, most wireless network cards in the notebook will have a physical switch, which is set to the back or side of the notebook. After finding it, make sure it is turned on. If it is on, it is turned off. There is also a key pair switch operation for some models of laptops. For example, Lenovo e600 also requires a function key (FN) + F4 to enable Nic switching. When it is turned on, the notebook will show a light.

3. if the "Windows cannot configure this wireless connection" still occurs at this time, you can confirm that the wzc service is not started. The method is as follows: "Start" menu-> Control Panel-> management tools-> services, or right-click "my computer" and click "service" in the left column of "manage" to open the service, find the last third Wireless Zero Configuration Service, and double-click it to check whether the service is started, change the Service Startup Mode to automatic, so that the service will be automatically started when the machine is restarted later.

4. open the wireless network connection. If you are prompted that the connection is not available, follow the prompts: click "Change Advanced Settings" on the left side and click the "wireless network" tab, then select the "configure my wireless network settings with Windows" check box.

After setting the settings according to the preceding solution, click "Refresh list" to display a wireless connection that can be searched.

Supplement: Why do I need to enable "Zero service" (Wireless Zero Configuration) every time I start the system? I set the "Automatic" option, but I still find that it is disabled every time I start the system!
A: Enable "Wireless Zero Configuration" and select "restart upon failure" in the "Recover" option "!

Some third-party wireless connectionsProgramDisable the "Wireless Zero Configuration Service" and switch to your own service program, which will cause the Windows Wireless Network Program to work normally. Find the third-party software and change the settings.