Windows System Installation-Unable to boot boot-bootmgr-is-missing

Reprint please attach address: http://blog.csdn.net/xiaobing_blog/article/details/38704041

Haven't written a blog for a long time, yesterday to help a colleague installed a Samsung computer. Let me have a little new understanding of the installation of the system,

Take this record and hope to help you.

As a computer enthusiast. Installed is a must-have skill. is also to reflect their own ability, or to understand the computer's self-confidence source.

Notebook model: Samsung's ultra-thin version, SamsungSeries 5 Ultra 530u3c, using 24G SSD + 500G

the machine is composed of hard disks Hybrid Drives

Description of my installation process:

1, the use of UltraISO software to make pure version of Win7 32-bit system USB boot disk.

2. Restart the Samsung computer, F2 Enter the system BIOS settings, set the fast BIOS MODE to Disabled (not set.

Unable to detect the USB flash drive in the BIOS, set the boot order to the USB stick first, F10 save exit. Reboot to load the file from the USB drive.

3, step by step operation. To the place where the partition was set up. Because the previous computer partition is very messy. I delete all the partitions directly,

Then we see two hard drives on the partition panel, which is a mix of 24G SSD + 500G HDD

hard disk, feeling win7 more love than resources, directly in The machine's hard disk is divided by 50G, and then the system is installed to the partition,  

Everything goes smoothly, and when the data is copied, the system fails to start when the restart is complete.

4, the installation is not installed, and then run the third step. To the place of the partition, a strange thing happened.

under normal circumstances, Windows The installation will actively partition itself 100M of space As system boot boot file storage, like MBR

Information, boot menu BCD is inside this partition, but I see this 100M partition in the SSD came up. It

there was a malfunction. The Ben shielded the SSD drive from the BIOS. Only can see the mechanical hard disk. So when you put the boot partition

into the SSD. unable to start because boot partition could not be found after booting BIOS, error bootmgr-is-missing occurred.

5. And then I had an idea, Since there is an SSD, why not install the system into the SSD, though smaller,

the software is loaded into the mechanical hard drive. as a result, the comprehensive consider that this method is feasible, so I repeated the third part,

this time the system is installed on the SSD. The same cannot be started. The guide partition is still created in the SSD, the same back to ask

The fourth step of the question.

6. Solution:

Since the system cannot detect SSDs, it is not possible to start the boot partition on an SSD. So it is necessary to draw

The drive partition is placed in the mechanical hard disk.

Here's how to fix it:
Tool: An old peaches made of U disk PE, Bootice Software (edit system menu start software). Put the Bootice software on the PE USB drive

Steps:

A, enter the system with PE. Open the Diskgenius partition software, delete all the partitions of the mechanical hard disk, and make out the 120M size

The partition comes out, this is greater than equals the boot partition size of 100M.

b, select the 100M size partition in the SSD, right-click, select Clone Partition, and select clone to the partition you just separated

(the partition of the mechanical hard disk.) 120M size).

< Span style= "Color:rgb (51,51,51); font-family: ' Microsoft yahei ', Arial,simsun, ' Hiragino Sans GB ', Pmingliu,verdana,sans-serif ' >              c, open Bootice software, select BCD, Browse for boot

on cloned mechanical hard drive boot partition (120M size)

folder under BCD, and thenSelect Advanced edit mode to ejectThe system's boot menu edit box, in application objects

the folder below is the boot menu, which normally appears a Windows 7, click Windows7, the right side will show Edit

                   , then see Span style= "FONT-SIZE:14PX; Color:rgb (51,51,51); font-family: ' Microsoft yahei ', Arial,simsun, ' Hiragino Sans GB ', Pmingliu,verdana,sans-serif; line-height:18.200000762939453px ">applicationdevice option that specifies the Win7 system

                    Intraday, Specify the partition to be installed on the Win7 system to To enable boot boot. As the fifth step above. My system mounted on SSD,

the drive letter of the divide is D, double-click Applicationdevice, pop up the edit box and find the disk (mine is SSD). Locate the system installation

The partition. Mine is the D-plate. Once determined, the BCD edit is complete.

< Span style= "Color:rgb (51,51,51); font-family: ' Microsoft yahei ', Arial,simsun, ' Hiragino Sans GB ', Pmingliu,verdana,sans-serif ' >             d, Delete useless boot partition, this fact does not delete also is OK. It's not going to boot from here anyway, method: Use

< Span style= "Color:rgb (51,51,51); font-family: ' Microsoft yahei ', Arial,simsun, ' Hiragino Sans GB ', Pmingliu,verdana,sans-serif ' >                   diskgenius, select the sub District. Delete is ok

7. Restart the computer. Boot normal, system installation is complete.

Note: Because my SSD is relatively small. So after loading the system, install some necessary software. It takes up about 14G, so the future is loaded

< Span style= "line-height:18.200000762939453px" >            Software. You should select install into other disks, otherwise

don't put too much on the surface . in fact, desktop storage is inside the system tray,---> This is only for my disk situation.

Windows System Installation-Unable to boot boot-bootmgr-is-missing