TL-WDR3310 USB port can share the printer, to meet the printing needs of the Lan host, the use of the topology is as follows:
This document describes how to use shared printing on a Windows computer.
To use the print service, you must first perform the following operations on the computer (otherwise, the computer cannot be printed ):
[1] to download and install the print server control program, click to download:
[2] make sure that the printer driver is installed on your computer.
[3] connect the printer to the USB interface of the router and start it on.
Log on to the vro management page and go
Network sharing
>
Print Server, OK
Print Server StatusIs
Online, As shown in the following figure:
1
Decompress the control program
Decompress the downloaded print server control program, and install the program (setup.exe), as shown in the following figure:
2
Start Installation
The installation interface shown in the following figure is displayed. Start to install the printer server control program, as shown in the following figure:
3
, Follow the setup wizard to install
Follow the setup wizard and click next, as shown in the following figure:
4
Set user information
Enter the user information, as shown in the following figure:
5
, Select the installation path
Select the software installation path and click
Next Step, As shown in the following figure:
The software will be installed in the selected path, click
Install, As shown in the following figure.
6
, Installation complete
Install and register software, as follows:
After running, the software installation is complete:
After installation, the USB Printer Controller icon appears on the desktop, as shown in the following figure.
Double-click the Desktop USB Printer Controller icon to open the TP-LINK print server Controller. After the software is turned on, it will automatically identify it. If the dual-band router model and USB port printer are displayed, the printer can be printed normally. As shown in the following figure:
Note:The software must be enabled; otherwise, it cannot be printed.
At this point, dual-band router printing server function settings are complete, in the Lan installed TP-LINK printing server control program computer can achieve shared printing.
When printing a file, select the model of the printer connected to the USB interface of the router, which is no different from the normal printing, as shown in the following figure:
[1]
What if the printer cannot be identified?
Answer:Make sure that your computer is connected to the vro's local area network and you can access the vro normally.
Confirm the vro Management Interface
Network sharing
>
Print ServerThe sharing feature is enabled.
Make sure that the printer is enabled.
[2]
What if I still cannot print it after installation?
Answer:Make sure that your computer correctly installs the TP-LINK print server controller and is on,
Confirm that the driver of the printer is correctly installed, or the computer can directly connect to the printer for printing.