Android1.6 on G2 magic has been used for a long time and has not been flushed until this morning. I have read a lot of tutorials and precautions on the Internet before I click it. I feel very complicated. I followed it step by step and found that it is not complicated. Note the following points:
1. Find a rom suitable for your mobile phone model with stable functions and low power consumption. You can go to the Forum to check your review. You can also review the review of axinghe egg in China.
2. Check the version of the RoM flash machine (SPL, radio, and recovery), such as spl1.33, radio3.22, and recovery1.6.2. One-click Conversion Tool radioswitchgui is very useful.
3. To meet the flash brush needs, you can start to brush a rom version.
Memo:
1. How to enter fastboot mode: Long press when the instance is shut downThe Return key and the access key.
2. view the SPL and Radio versions.
3. How to Use radioswitchgui: Install the Java environment on the PC, connect the mobile phone to fastboot mode, connect the USB data cable to the PC, and run winrun. bat.
4. fastboot mode. After USB is connected, install the driver.Program: I did not find a suitable independent driver under win7, So I installed HTC Sync for all HTC Android phones, which contains the driver.
5. Go to recovery mode to flash the machine: Long press when the machine is shut downHome Key and host key. If an exclamation mark and a mobile phone image are displayed after a long press, the reason is that the recovery version is older. At this time, press the answer and hanging keys at the same time, and then press the Home Key and shut down key to enter the recovery mode. In this case, we recommend that you upgrade the recovery to 1.6.2.
6. After Entering the recovery mode, run the wipe command, set all options to wipe, enter the flash zip from sdcard, and click the brush in the specified order. For example, first Rom, then port, and then Google patch package. (Before copying the downloaded Rom, port, and Google patch files to the root directory of the SD card)
7. Back up contacts and text messages before refreshing. Contacts can be synchronized to Google. If the previous version is axing and the text message has the backup and restoration function, it is best not to use this function, because flushing to 2.2 may not have the backup and restoration function, which is such a tragedy. So find a third-party software to back up your text message. For example, 91 assistant.
8. Glossary:
SPL: similar to PC BIOS
Root permission: something that must be obtained before SPL refreshing is generally unavailable (except for the official Rom, most non-governmental Rom comes with root)
Gold Card: Brush specific Rom will be used, usually not used
RADIO: Wireless Communication Module for Mobile Communication
Firmware: 1.5 ~ 1.6 ~ 2.0 ~ 2.2
ROM: firmware-based Flushing
Recovery: When the instance is shut down, press the host key + house key to display the recovery screen. Fl, backup, and recovery are all performed on this interface.
Once you click it, you will not feel the trouble. This article only describes the general method of flash. The links provided are not suitable for mobile phones of all periods and models. Therefore, it is important to master the method and go directly to the forum to find the latest Rom brush, which is not difficult.
However, we still need to remind you that there is a risk to flash the machine, so be careful when you do it. You can see it before you click it. Otherwise, it will become a brick.
References:
1. HTC magic (G2) Flash tutorial! Four-step flash brush! New update
2. The best G2 32a SPL & Radio One-key Conversion Tool
3. Today's most perfect 2.2 Chinese ROMs cm6.1rc1 original version plus oc614 Port Stable Power saving fast join incoming call ownership!