CentOS 6.5 System Installation Configuration illustration tutorial

Up to now CentOS 6.x is the latest version of CentOS 6.5, and the following is a description of the specific installation configuration process for CentOS 6.5

Server-related settings are as follows:

Operating system: CentOS 6.5 32-bit

IP Address: 192.168.21.129

Gateway: 192.168.21.2

dns:8.8.8.8 8.8.4.4

Note:

CentOS 6.5 System Image has 32-bit and 64-bit two versions, production server if large memory (4G or more memory)

We recommend installing the 64-bit version Centos-6.5-x86_64-bin-dvd1.iso

Attached: CentOS 6.5

32-bit:

Http://mirror.centos.org/centos/6.5/isos/i386/CentOS-6.5-i386-bin-DVD1to2.torrent

64-bit:

Http://mirror.centos.org/centos/6.5/isos/x86_64/CentOS-6.5-x86_64-bin-DVD1to2.torrent

1, the CentOS 6.5 system image has two, the installation system only uses the first mirror, namely Centos-6.5-i386-bin-dvd1.iso (32 bit) or Centos-6.5-x86_64-bin-dvd1.iso (64 bit), The second image is the system comes with a software installation package;

2, the installation of the CentOS 6.5 system computer memory must be equal to or greater than 628M (minimum memory 628M) to enable the graphics installation mode;

3, CentOS 6.5 text installation mode does not support custom partitions, we recommend the use of graphical installation mode installation;

4, CentOS 6.5 system installation method is divided into: Graphics installation mode and text installation mode;

5, CentOS 6.5 system operation mode is divided into: with a graphical interface, you can use the mouse to manipulate the graphical way and without a graphical interface, directly with the command line operation of the text mode (specific system operating mode, you can customize the process of the system installation);

First, install CentOS 6.5

To successfully boot the system with the CD, the following interface will appear

Interface Description:

Install or upgrade an existing system installation or upgrade of existing systems

Install the system with basic video driver during installation with the base graphics driver

Rescue installed system to enter the repair mode

Boot from local drive exits installation from hard disk boot

Memory Test RAM Test

Select the second item here, install or upgrade the existing system, enter.

If there is a question about whether to test the CD media, select "Skip" to skip the test.

The following interface appears

Next

Select language: Chinese (Chinese version) it is recommended to install English version for production server

Next

Keyboard selected as: U.s.english

Next

Select the first item, basic storage device

Next

Select the first item: Yes, ignoring all data

Next

Set the hostname, here default, and then modify after the installation is complete

Optionally configure the network

Next

Time zone selection: etc/gmt +8 Beijing time Zone

Tick in front of "System clock user UTC", using UTC time

Set Root password

Next

Note: If you use a password that is too simple, the system will automatically prompt you: Your password is not secure, too simplistic/systematized

Choose "Use anyway" here anyway

Production environments must have strong, complex passwords

Next

Select the last item, create custom Layout, creating a customized partition

Next

Can see the capacity of the hard disk, I show here is 25G, now custom partition.

Note: Before partitioning, you should plan well, how to partition

My partition here is as follows:

HDD Total 25G

/boot #128M

/#剩余所有空间

Special Note:

For the official production of the server, remember that the data disk must be partitioned separately, to prevent problems in the system to ensure the integrity of the data. For example, you can divide a

/data is dedicated to storing data.

The swap partition is not partitioned, and for large memory servers, the swap partition may not be set, or after determining the amount of memory the system needs to use,

Add swap again

With free partition selected, click Create

Select Standard Partition Partition, click Create

mount point:/boot

File system type: ext3

Size size:128

Other options default to

Ok OK

Keep the free partition selected, click Create

Select Standard Partition Partition, click Create

mount point:/

File system type: EXT4

Check "Use all available space"

Other options default to

Ok OK

After creating the partition, as shown, then click Next

Create swap partition, select Create, do not select mount point, Direct Select the second file type is swap.

Default Yes #提示没有创建swap分区, followed by create

Point "format" formatting

Select ' Write changes to disk ' to write modifications to disk

Default

Next

The default is: First, desktop desktops

Choose here: Minimal min

Next

Note: You can click Customize now, select the SDK software to install

For Chinese support, you need to select a custom to complete

You can also install packages by using Yum Source, RPM, or compile when needed.

Start installation

Installation Complete

Point "Reboot" reboot, automatic system restart

After restarting, the following login screen appears

System Installation Complete

Second, set the IP address, gateway, DNS

Conventions:

The first network card is the external network

The second network card for the intranet (no external network of the machine will also be configured in the network on the second NIC)

Description: CentOS 6.5 is installed by default and does not automatically open the network connection!

Enter account root

Then enter the password set during installation and log in to the system

Vi/etc/sysconfig/network-scripts/ifcfg-eth0 #Edit the configuration file, add modify the following content
Bootproto = static - enable static IP address
Onboot = yes - enable automatic network connection
IPADDR = 192.168.21.129 - set IP address
Netmask = 255.255.255.0 set subnet mask
Gateway = 192.168.21.2 - set gateway
Dns1 = 8.8.8.8 set primary DNS
Dns2 = 8.8.4.4 set standby DNS
Ipv6init = no - Disable IPv6
: WQ! Save exit
Service ip6tables stop - stop IPv6 service
Chkconfig ip6tables off - Disable IPv6 boot
Service yum-updatesd stop - shut down system automatic update
Chkconfig Yum updatesd off disable startup
Service network restart? Restart network connection
Ifconfig - view IP address
Third, set the host name
Conventions:
Hostname naming specification: Business-Computer room-Master Preparation-domain name
The host name is set here: bbs.hz.m.osyunwei.com
1, hostname "bbs.hz.m.osyunwei.com"
#Set the host name to bbs.hz.m.osyunwei.com
2. VI / etc / sysconfig / Network - edit the configuration file
Hostname= bbs.hz.m.osyunwei.com
#Modify localhost. Localdomain to bbs.hz.m.osyunwei.com
: WQ! Save exit
3. VI / etc / hosts edit the configuration file
127.0.0.1 bbs.hz.m.osyunwei.com localhost
#Modify localhost. Localdomain to bbs.hz.m.osyunwei.com
: WQ! Save exit
Shutdown-r now? Restart the system
Iv. increasing the Swap partition
You need to add 1024M of swap space after determining the memory that the server needs to use
Specific operation:
1, DD if = / dev / zero of = / TMP / swap BS = 1m count = 1024m ා create 1024m file block
2. Mkswap / TMP / swap - create swap file
3. Swapon / TMP / swap - activate the swap file
4. Swapon-s view swap
5, modify the/etc/fstab file, add the following content, so that the system boot automatically start
VI / etc / fstab ා add the following code at the end
/tmp/swap Swap swap default 0 0
: WQ! Save exit

At this point, the CentOS 6.5 system installation configuration is complete

CentOS 6.5 System Installation Configuration illustration tutorial