CentOS 7.0 NVIDIA graphics card installation steps:
1 Download the driver on the NVIDIA network
After searching for the corresponding driver, do not point directly, but right Jian, Save Link as ...
Otherwise, there will be a half-day download of the situation.
It is best not to have Chinese on the path of storage.
The path I'm storing is ~/downloads/nvidia-linux-x86_64-346.47.run.
2 Shield default with Nouveau
Use the SU command to switch to the root user: Su root
Open/lib/modprobe.d/dist-blacklist.conf
Comment out the NVIDIAFB.
#blacklist NVIDIAFB
Then add the following statement:
Blacklist nouveau
Options Nouveau modeset=0
3 Rebuilding Initramfs Image step
mv/boot/initramfs-$ (uname-r). img/boot/initramfs-$ (uname-r). Img.bak
dracut/boot/initramfs-$ (UNAME-R). IMG $ (UNAME-R)
4 Modifying the run level to text mode
Systemctl Set-default Multi-user.target
5 reboot, login with root user
Reboot
6 See if Nouveau has been disabled
LS MoD | grep nouveau
If the relevant content is not displayed, the description is disabled.
7 Enter the directory where the driver is downloaded
chmod +x Nvidia-linux-x86_64-346.47.run
./nvidia-linux-x86_64-346.47.run
During the installation process, select the Accept
If you are prompted to modify xorg.conf, select Yes
8 Modifying the run level back to graphics mode
Systemctl Set-default Graphical.target
9 Reboot, OK
The NVIDIA X Server settings menu can be seen in Applications--other.
CentOS 7.0 installation nvidia driver
