CentOS 7.0 NVIDIA graphics card installation steps

From:http://blog.sina.com.cn/s/blog_49c0985a0102v3fa.html

CentOS 7.0 NVIDIA graphics card installation steps:

1 Download the driver on the NVIDIA network
After searching for the corresponding driver, do not point directly, but right Jian, Save Link as ...
Otherwise, there will be a half-day download of the situation.
It is best not to have Chinese on the path of storage.
The path I'm storing is ~/downloads/nvidia-linux-x86_64-346.47.run.

2 Shield default with Nouveau
Use the SU command to switch to the root user: Su root
Open/lib/modprobe.d/dist-blacklist.conf

Comment out the NVIDIAFB.
#blacklist NVIDIAFB

Then add the following statement:
Blacklist nouveau
Options Nouveau modeset=0

3 Rebuilding Initramfs Image step

mv/boot/initramfs-$ (uname-r). img/boot/initramfs-$ (uname-r). Img.bak
dracut/boot/initramfs-$ (UNAME-R). IMG $ (UNAME-R)

4 Modifying the run level to text mode
Systemctl Set-default Multi-user.target

5 reboot, login with root user
Reboot

6 See if Nouveau has been disabled
LS MoD | grep nouveau

If the relevant content is not displayed, the description is disabled.

7 Enter the directory where the driver is downloaded
chmod +x Nvidia-linux-x86_64-346.47.run
./nvidia-linux-x86_64-346.47.run

During the installation process, select the Accept
If you are prompted to modify xorg.conf, select Yes

8 Modifying the run level back to graphics mode
Systemctl Set-default Graphical.target

9 Reboot, OK

The NVIDIA X Server settings menu can be seen in Applications--other.

CentOS 7.0 NVIDIA graphics card installation steps