CentOS Load/Mount USB drive

1, log in as root user
Load the USB module first Modprobe usb-storage
Use Fdisk-l to see the device of U disk
If the USB stick is sda1

2, make sure the folder/usb is established under directory/MNT, if not established can type the command: Mkdir/mnt/usb_disk, after successful proceed to the next step.

3. To load the U-disk, type the following command:mount/dev/sda/mnt/usb_disk
After success, you can use the U-disk, the file is under the directory/MNT/USB.

4, unload U disk: After the use of the U disk, you need to type the uninstall USB flash drive command before pulling out
The command is as follows: Umount/mnt/usb

CentOS Load/Mount USB drive