Configure a static IP for CentOS in VMware with access to VMware under Network-windows
First make sure that the virtual network card (VMware Network Adapter VMnet8) is turned on, and then enter "Ipconfig/all" on the Windows command line to find the VMware network Adapter VMnet8 IPv4 address (for example: 192.168.16.1), such as: then make sure that the network configuration of the virtual machine CentOS is NAT, such as: finally set the static IP as follows: Start and enter the CentOS system, enter "vim/etc/" in the terminal. Sysconfig/network-scripts/ifcfg-eth0 "To modify the IP configuration, and then enter the configuration information such as: After saving exits, enter" service network restart "in the terminal to restart the network service, and then in the terminal" ping Www.163.com "View returns the following message to indicate a successful summary: after configuring the IP. Ping 8.8.8.8 See can ping pass, can be configured correctly. If you can ping, you still cannot access the network. Vi/etc/resolv.confnameserver 8.8.8.8
Configure a static IP for CentOS in VMware and have access to the network
