Example of setting static IP addresses for vmware bridging in centos

Use bridge Mode

Select the bridging network card when bridging

Set centos static IP address

Two configuration files are involved:/etc/sysconfig/network-scripts/ifcfg-eth1
First, modify/etc/sysconfig/network as follows: add GATEWAY = 192.168.0.1. Gateway address
View the host cmd ipconfig/all at the Gateway address

Then modify the/etc/sysconfig/network-scripts/ifcfg-eth1:

Vim/etc/sysconfig/network-scripts/ifcfg-eth1
# Put the following content
DEVICE = "eth1"
BOOTPROTO = "static"
IPADDR = 192.168.0.229
BROADCAST = 192.168.0.255
NETMASK = 255.255.255.0
GATEWAY = 192.168.0.1
ONBOOT = "yes"
TYPE = "Ethernet"
DNS1 = 8.8.8.8

View network restart after configuration is complete

Restart the network: service network restart