Hi-spiler of Linux Services

Sea Spider

Http://docs.hi-spider.com/user_guide.V8/index.html

Sea Spider routing system is not high on disk, as long as 1 GB storage space. Now with the electronic disk, CF card, SD card prices continue to decline and the speed of continuous improvement, as a routing system storage equipment, with the reliability, stability, earthquake resistance, high temperature, long life characteristics are now ordinary hard disk can not be compared. And sea Spider routing also supports SSD installation, does not support disk installation of SCSI and SAS interfaces, does not support RAID mode installation.

Click on the sea Spider route to the top left logo icon to enter the Sea Spider Routing homepage interface. The number of online users refers to the number of users who have been online for more than half an hour, and the active user refers to the number of hosts that have traffic routed through the Internet, and PPP users refer to the number of hosts connected to the route with PPPoE dialing. Number of computers currently logged on to the Web

If more than one disk is installed on the route, or if there is a single disk space remaining. You can create partitions to store logs or do FTP services.

Remote wake-up technology (Wol,wake-on-lan) is a technology that can be remotely powered on by a LAN with other hardware and software. It allows us to remotely control the computer's power-on when needed, and it is ideal for environments with remote network management requirements. Remote wakeup requires network card, motherboard, power supply support and coordination to achieve.

Static routes

X.X.X.X/24 Blank (Automatic) Local

The destination network is the one that the user wants to access, and the egress gateway is the address of the router's next-hop IP.

Multi-line access means that routers connect to the Internet through multiple lines, which may be provided by the same or different network operators. There are two possible problems with this scenario:

• When multiple lines are provided by the same network operator, one line is very large, and the other line has no traffic, which means that all data is only one line away.

• When a number of different network operators provide the route, it is sometimes very slow to visit certain websites, but it is very fast. For example, a China telecom and a Chinese netcom line access, when visiting the Sea Spider Network Technology website in China Telecom, sometimes very quickly, sometimes very slow. This is because your access requests sometimes go to China Telecom's line, they are located in the same network, so the speed will be very fast, but sometimes the access request will take China Netcom's line, they are located in different networks, to take a lot of detours to reach our site, so the speed will be very slow.

In view of the above two problems, the Sea Spider routing system provides multi-line load balancing, bandwidth overlay, Policy Routing and other solutions.

The following are examples of four scenarios that illustrate the setup of multiple lines:

1. Two lines of the same network operator overlay, for example: two China Telecom line overlay or two Chinese netcom line overlay.

2. Two policy routes for different network operator lines, for example: a China telecom line and a Chinese netcom line of strategic routing.

3. A number of different network operator routes, such as a strategic route, such as: A China Telecom, a Chinese netcom and a Chinese CTT strategic route.

4. Bandwidth overlay and Policy routing for several different network operators, for example: two Chinese telecom line bandwidth overlay, two China netcom line bandwidth overlay and a Chinese CRC line to do Policy routing.