As a business need, I try to install CentOS for the company server today, the selected version is 6.7
First step, download: http://isoredirect.centos.org/centos/6/isos/x86_64/
I chose the biggest one, according to the online version of the DVD1 can be, DVD2 contains some of the other software
Step two, make the startup disk
Download old peaches, make startup disk with one click
The third step, restart the computer, choose to start with the U-disk, into the installation screen
A few important options
1, Hardriver----because the system in the U disk
2, choose SDB, this if not a try
3, choose Basicserver, this is not with the desktop, pure shell interface
Fourth step, after the installation is complete, found unable to surf the internet
See also: http://www.linuxidc.com/Linux/2012-11/74386.htm
Input ifconfig, found only one loop network card, this time need to open the network card
Enter Ifup eth-0, enter ifconfig again, find the value of eht-0, but no IP address,
Input Vi/etc/sysconfig/network-scripts/ifcfg-eth0
Change Bootproto=dhcp,ps. People on the internet say that DHCP must be capitalized, my machine is not capitalized, lowercase but ok.
Change the Onboot=yes so that the NIC is turned on when the machine restarts
Exit Edit
Enter the service network restart restart the NIC, enter Ifconfig again, and find the IP address
Using ping www.baidu.com, there is a response, OK.
Ps.linux Some of the commands http://www.cnblogs.com/mq0036/p/3795950.html
For the first time, I used pure command to make Linux, record it, lest I forget.
Installation of CentOS, commissioning of the network