Local PC installation of the CentOS 6.5 operating manual and problems encountered

I'm using a USB stick to install

First, the preparatory work

1. Download Centos6.5 ISO file

I'm on the official website under the 6.5 version of Centos-6.5-x86_64-bin-dvd1.iso,

Because the Centos-6.5-x86_64-bin-dvd2.iso function is generally not used, so it is only used DVD1

2. A u disk larger than 4G

3. One host (of course)

Second, the production of ISO start U disk

1, I use the UltraISO (soft disk pass)

2. Install the UltraISO software, insert the USB stick, open the UltraISO software, locate the Centos6.4 installation image
4. Then click "Start", "Write to Hard disk image", the hard drive is your u disk, image file installation CD ISO, the writing method is usb-hdd+,
6. "Quick Start"-"write to new hard drive boot record (MBR)"--"usb-hdd+
7. Click the "Write" button. After the completion of the installation of the U disk is ready

   , select write to hard disk mirroring under the Start button.

   Note here: After burning successfully, if the version 6.5 does not need to copy the ISO to the U disk, but if it is Centos6.4, you need to copy the image to the USB drive, so that the Centos6.4 USB disk boot disk setup is complete. This article and the same on-line copy directly, the focus lies in the problems encountered and solutions two, installation boot into the BIOS setup from the USB stick boot, the following interface will appear.
   2. 1. Install or update the system

      2. Install the display card driver

      3. System Repair

      4. Boot from hard drive

      5. Memory Test

      Of course we are directly to the return, even if you do not move, the default will be automatically after the end of the countdown to start the installation.

   4. 2

      Install CentOS, of course, to install 64, oh you understand.

      This means, press OK to test your installation media, i.e. DVD disc, skip skipping directly.

      Here is the start of the installation process, later ...

   6. 3

      This is the first graphical interface, we click "Next" in the bottom right corner, next.

   8. 4

      Then to choose the language of installation, this needless to say, everyone is Chinese,.

   10. 5

       Choose the keyboard, this do not choose the wrong, in fact, the default can be.

   12. 6

       Here to choose the storage device installed, I think everyone is installed to the local hard disk, that is the above,. Select: After basic storage device, click Next.

   14. 7

       This will pop up a warning, will delete all detected data of this hard drive (40960MB), if it is a multi-drive installation or upgrade installation, be careful to pay attention to, the new installation, the direct click: Yes,.

   16. 8

       Here is the choice of time zone, we choose: Asia/China/Shanghai,. Next.

   18. 9

       Then to set the root account (root) password, if your password is too simple, there will be another hint, we can choose: in any case to use.

   20. 10

       To this interface is partition with installed, we are a brand new installation, just choose: use all the space.

       Here I have tried to use the "Create a custom Layout" way, helpless level is shallow, encountered a few problems, not resolved, so eventually chose to use all the space
   22. 11

       Click Next, you will be prompted to confirm the format and write the data, we select: Write the modification to disk.

   24. 12

       Then you start formatting ...

   26. 13

       Then, it's time to choose to install the CentOS component, which you have to say in detail.

       This step is to choose what the machine is for, and is:

       1, the installation of desktop system

       2. Minimal installation of desktop system

       3. Minimized installation

       4, the installation of the basic server

       5, the database server installation

       6, the installation of Web page Server

       7, the installation of virtual host

       8, the installation of software development workstations

       Choose one, the system will automatically give you to install some of the required software, of course, you can choose the bottom: Now customize, to select the components to install.

       In general, the first contact of the friend is generally the number one bar, including the X WINDOWS, that is, the graphical interface and many other functions, in learning at the same time, what problems can be processed in the graphical interface. But the general master, generally do not have to install the desktop graphical interface! I install the Web server myself, because it is often used

   28. 14

       Click Next, if you have a tick customize now custom installed components, you can also modify the various components and functions, fortunately, is Chinese, hehe.

   30. 15

       After the next step, the installation is started.

       The installation process varies depending on the time that you select the component content ....

   32. 16

       Installation Complete, click: Reboot, that is, after rebooting, enter the CentOS system.

       END
   If there is a graphical interface, the first time to enter the system to establish users
   2. System first boot, first interface,.

   4. It is necessary to agree to the permit.

   6. Create a user, explained that the system has been installed at the completion of a root account (root), the password is set before, the user created in this is just ordinary users, not the administrator oh,.

   8. When creating a user, if your password is too simple, there will be a hint Oh, click: Yes.

   10. Set the date and time, these people all understand, hehe,.

   12. Click: Forward, start to create the user and configuration environment, the process diagram is as follows.

   14. Then see the login interface, OK user is just set up the ordinary user, click and enter the password to login on it.

   16. If you do not want to log in to OK, or if you want to login to the administrator, please click on: Other,.

       Then enter the user name and password.

       Tip: When you log in to root account (root), there will be a "security prompt", if you do not want it to prompt each time, you can click on its left check box.

       1. 1. 1. After landing the system, is the CentOS graphical interface, operation as usual windows almost.

                Have a moment to try it out.

                Third, the individual encountered the problem, 1, in the selection of partitions, looking for install.img when prompted to find that I was using the old Peaches ISO one-click Production Tools, out of this problem, eventually also use Unltroiso Resolution 2, in my custom partition end Next, select the boot item next, prompt　　"Setup view hangs in image # #, but cannot find the image on the hard disk ..." Online to find a solution to this problem, is to start a USB flash drive after the production, the ISO file to copy to the USB stick, and then install it, but the actual I use the time still can not solve the problem, The reason is that we used the 6.4 version of the solution to solve the problem in the 6.5 version, so after trying to re-create a USB flash drive through the UltraISO to solve the problem 3, SDA must have a GPT disk label after the custom partition click Next, this prompt appears, This is to feel that I know enough about this, so return to choose the way to use all the space, smooth installation

Local PC installation of the CentOS 6.5 operating manual and problems encountered