The installation of ise13.3 in centos 5.5 fails.

We successfully installed ise13.3 in centos 5.5 32-bit system today. After installation is complete, set the environment variables according to the prompts in the installation window after running settings32.sh.

Setenv Xilinx/tools/Xilinx/13.3

Setenv path $ path: $ Xilinx/ise_ds/ISE/bin/Lin

And then re-source ~ /. Cshrc, and then tap ISE to find that it cannot be started at all.

After finding the problem on the Internet, we found that SELinux was originally a problem. We need to disable SELinux to go to the security level tab under system-> Administration-> Security Level and firewall, and click Disable, then OK.

Now you can enter Ise, and the license configuration cannot be started .... Manually. There is an xlcm under/ise_ds/ISE/common/bin/Lin under $ Xilinx, and the license is configured after running. Unfortunately, after the configuration is complete, segmentation Falt is prompted, and then it will no longer start. I don't know why. Before an error occurs, the license configuration is successful. Yes.

Address: http://www.eetop.cn/blog/html/46/553746-27334.html