TIPS: Exploring the power consumption of vswitches

Welcome to the network technology community forum, and interact with 2 million technical staff to enter the "hardware connection method" in the ISDN terminal device. This article is excerpted from the manual. This makes it easier for you to focus on setting up conversations. You need to make necessary preparations before installing the device. Usually, the Telecommunications Bureau will

Welcome to the network technology community forum and interact with 2 million technical staff> go to the ISDN terminal device to explain the "hardware connection method". This article is taken from the manual. This makes it easier for you to focus on setting up conversations. You need to make necessary preparations before installing the device. Usually, the Telecommunications Bureau will

Welcome to the network technology community forum and interact with 2 million technical staff> enter

The "hardware connection method" is described in the ISDN terminal device. This article is taken from the content above in the manual. This makes it easier for you to focus on setting up conversations.

Before installing a device, you need to make necessary preparations. Generally, the Telecommunications Bureau sells or rents the device together. We recommend that you select an external device for easy installation and the Panel has an indicator light, you can use these indicators to determine the status of the device. Here we take the installation of an external isdn ta in Windows 98 as an example, to describe the installation and connection steps of ISDN terminal equipment (most of the devices provided by the Telecommunications Department are external devices ).

Hardware connection method

◆ Shut down the computer and isdn ta power supply, connect the needle connector of RS-232 cable with the "RS-232" interface on the back board of isdn ta, fasten the screw; the other end of the cable is connected to the RS-232 serial port of the computer.

◆ Connect one end of the RJ-11 telephone line to the entry line of the ISDN terminal equipment, and the other end to the "U" interface on the back board of the isdn ta, the "S/T" interface on the backboard of the isdn ta can be used to connect digital phones, four types of fax machines, and other digital devices.

◆ Using RJ-11 line to connect analog equipment, such as ordinary analog telephone, telephone answering machine, three types of fax machine, modem and other equipment, connected to the slot marked with ANA1 or ANA2.

◆ Connect one end of the power supply to the PWR slot on the rear panel of isdn ta, and connect the other end to the power supply. Exam books

◆ Enable the isdn ta power supply. When the machine starts self-testing, the DATA light, K light, ANA1 light, And ANA2 light will all turn on and off, and then the four lights will turn on again and again, if all the self-check tests are OK, they will all be dark. Now you can use ISDN TA.

◆ Power on your computer and install the driver. This process is simple, just follow the prompts.

Software settings of ISDN Terminal Equipment

To access the Internet through isdn ta, You need to configure the "Dial-Up Network" for Windows 95/98. The procedure is as follows:

◆ Install network protocols

Install network components in "network" of "Control Panel. Make sure that the "dial-up network adapter" and "TCP/IP" protocols are installed.

◆ Configure the dial-up Network

Double-click "my computer" on the desktop, open "Dial-Up Network", double-click "New Connection", enter the connection name, and select the modem as the corresponding ISDN terminal device. Click "Next" and enter the phone number of the recipient. In the next window, click "Next" and then click "finish ". Now, the dial-up network is configured, and a new connection will be added to the "Dial-Up Network" to access the Internet.