ADB shell device not found resolves

After connecting the device under Ubuntu12.04, it is shown:device not found, the workaround is as follows:

Try it first:

ADB kill-server

ADB start-server

ADB shell

If you can't, follow the steps below.

1) First enter the user directory

CD ~

Ls-al

You can see a/.android directory.

CD. Android

There should be a Adb_usb.ini file that is not created.

Touch Adb_usb.ini

2) Use LSUSB to see the vid of the connected device.

Connect the device first, run

[Email protected]:~/.android$ Lsusb
Bus 001 Device 001:id 1d6b:0002 Linux Foundation 2.0 root Hub
Bus 002 Device 001:id 1d6b:0002 Linux Foundation 2.0 root Hub
Bus 003 Device 001:id 1d6b:0002 Linux Foundation 2.0 root Hub
Bus 004 Device 001:id 1d6b:0003 Linux Foundation 3.0 root Hub
Bus 001 Device 002:id 8087:0024 Intel Corp Integrated rate Matching Hub
Bus 002 Device 002:id 8087:0024 Intel Corp Integrated rate Matching Hub
Bus 003 Device 002:id 1234:0010
Bus 001 Device 003:id 1bcf:2883 sunplus Innovation Technology Inc.
Bus 003 Device 007:id 192f:0916 Avago Technologies, Pte.

Unplug the device and run it again

[Email protected]:~/.android$ Lsusb
Bus 001 Device 001:id 1d6b:0002 Linux Foundation 2.0 root Hub
Bus 002 Device 001:id 1d6b:0002 Linux Foundation 2.0 root Hub
Bus 003 Device 001:id 1d6b:0002 Linux Foundation 2.0 root Hub
Bus 004 Device 001:id 1d6b:0003 Linux Foundation 3.0 root Hub
Bus 001 Device 002:id 8087:0024 Intel Corp Integrated rate Matching Hub
Bus 002 Device 002:id 8087:0024 Intel Corp Integrated rate Matching Hub
Bus 001 Device 003:id 1bcf:2883 sunplus Innovation Technology Inc.
Bus 003 Device 007:id 192f:0916 Avago Technologies, Pte.

Comparison found

The Bus 003 Device 002:id 1234:0010 is connected.

0x1234 is the vid, behind the 0x0010 is the PID, write down these two values.

3) Open the Adb_usb.ini file you just created

sudo gedit Adb_usb.ini

Put the following inside the gedit.

# ANDROID 3RD Party USB VENDOR ID LIST--does not EDIT.
# Use the ' Android update adb ' to GENERATE.
# 1 USB VENDOR ID PER line.
0x1234

The last line of 0x1234 is the vid of the device you just wrote down.

If you have adb_usb.ini~ this file, add it.

sudo gedit adb_usb.ini~

Note: The first time I hit the top of the Rockchip is OK, but I do not know how to do after a long time, the back must be called once RK himself compiled by the ADB can be re-use of the JDK standard ADB.

4) Run as root

sudo su

ADB shell

You should see the device connected to it.

5) Finally, if you want to connect as a normal user, you can add the owner parameter in the/etc/udev/rules.d/51-android.rules.

subsystem== "USB", attr{idvendor}== "1234", attr{idproduct}== "0010", mode= "0666", owner= "Alex"

1234 and 0010 are both vid and pid,owner fill in the username.

Save exit. Can be shipped as a normal user

ADB shell device not found resolves