Install mysql5.1 (Linux Red Hat 3)

First:

Uninstall MySQL

 

Then install:

Linux MySQL (RPM) Installation User Manual

Install MySQL
1. Download the MySQL Installation File
Installing MySQL requires the following two files: MySQL-server-5.1.7-0.i386.rpm

For: http://dev.mysql.com/downloads/mysql/5.1.html, open this page, drop-down page to find the "Linux x86 generic RPM (statically linked against glibc 2.2.5) Downloads" item, find the "server" and "client programs" item, download the two required RPM files.

2. Install MySQL
The RPM file is a software installation package developed by Red Hat. RPM frees Linux from complicated procedures when installing software packages. The frequently used parameter of this command during installation is-IVH, where I indicates that the specified RMP package will be installed, and V indicates the detailed information during installation, h indicates that the "#" symbol appears during the installation to display the current installation process. This symbol will not stop until the installation is complete.
1) install the server
Run the following command in the directory with two RMP files:
The [root @ test1 local] # rpm-IVH MySQL-server-5.1.7-0.i386.rpm MySQL-client-5.1.7-0.i386.rpm displays the following information.
Warning: MySQL-server-5.1.7-0.i386.rpm
Signature: nokey, key ID 5072e1f5
Preparing... ######################################## ### [100%]
1: mysql-server ##################################### ###### [100%]
...... (Omitted)
/Usr/bin/mysqladmin-u Root Password 'new-password'
/Usr/bin/mysqladmin-u root-H test1 password 'new-password'
...... (Omitted)
Starting mysqld daemon with databases from/var/lib/MySQL
If the preceding information is displayed, the Server installation is complete. Run netstat to check whether the MySQL port is opened. If yes, the service is started and the installation is successful. The default MySQL port is 3306.
[Root @ test1 local] # netstat-Nat
Active Internet connections (servers and established)
PROTO Recv-Q send-Q local address foreign address State
TCP 0 0 0.0.0.0: 3306 0.0.0.0: * listen
The above shows that the MySQL service has been started.

2) install the client
Run the following command:
[Root @ test1 local] # rpm-IVH MySQL-client-5.1.7-0.i386.rpm
Warning: MySQL-client-5.1.7-0.i386.rpm: V3 DSA Signature: nokey, key ID 5072e1f5
Preparing... ######################################## ### [100%]
1: mysql-client ##################################### ###### [100%]
The installation is complete.
Use the following command to connect to MySQL and test whether the connection is successful.

3. log on to MySQL

The command used to log on to MySQL is mysql. the syntax of MySQL is as follows:
MySQL [-u username] [-H host] [-P [Password] [dbname]
Username and password are the username and password of MySQL respectively. The initial management account of MySQL is root, and there is no password. Note: This root user is not a Linux system user. The default MySQL user is root. Because there is no password at first, you only need to type MySQL for the first time.
[Root @ test1 local] # MySQL
Welcome to the MySQL monitor. commands end with; or/g.
Your MySQL connection ID is 1 to server version: 4.0.16-Standard
Type 'help; 'or'/H' for help. type'/C' to clear the buffer.
Mysql>
The prompt "mysql>" appears. Congratulations! The installation is successful!
The logon format after the password is added is as follows:
Mysql-u root-P
Enter Password: (enter the password)
-U is followed by the user name.-P requires the password. Press enter and enter the password at the Enter password.

Note: This MySQL file is located in the/usr/bin directory. It is not a file with the Startup file/etc/init. d/MySQL described later.

 

 

 

 

4. Several important MySQL Directories

After MySQL is installed, its database files, configuration files, and command files are not installed in the same directory as SQL Server by default. It is very important to understand these directories, especially for Linux beginners, the directory structure of Linux itself is complicated. If you cannot figure out the installation directory of MySQL, you won't be able to learn it in depth.

The following describes these directories.

1. Database directory
/Var/lib/MySQL/

2. Configuration File
/Usr/share/MySQL (MySQL. server command and configuration file)

3. Related commands
/Usr/bin (commands such as mysqladmin mysqldump)

4. Start the script
/Etc/rc. d/init. d/(directory for starting the script file MySQL)

 

 

5. Change the logon Password

MySQL does not have a password by default. It is self-evident that the password is added after installation.

1. Commands
Usr/bin/mysqladmin-u Root Password 'new-password'
Format: mysqladmin-u username-P old Password New Password

2. Example
Example 1: Add a 123456 password to the root user.
Type the following command:
[Root @ test1 local] #/usr/bin/mysqladmin-u Root Password 123456
Note: because the root account does not have a password at the beginning, the old-P password can be omitted.

3. test whether the modification is successful
1) login without a password
[Root @ test1 local] # MySQL
Error 1045: Access denied for user: 'root @ localhost' (using password: No)
An error is displayed, indicating that the password has been modified.
2) log on with the modified Password
[Root @ test1 local] # mysql-u root-P
Enter Password: (enter the password 123456 after modification)
Welcome to the MySQL monitor. commands end with; or/g.
Your MySQL connection ID is 4 to server version: 4.0.16-Standard
Type 'help; 'or'/H' for help. type'/C' to clear the buffer.
Mysql>
Successful!
You can use the mysqladmin command to change the password or the database to change the password.

 

 

 

6. Start and Stop

1. Start
After MySQL is installed, run the following command to start MySql in the/etc/init. d directory.
[Root @ test1 init. d] #/etc/init. d/MySQL start

2. Stop
/Usr/bin/mysqladmin-u root-P Shutdown

3. Automatic Start
1) Check whether MySQL is in the Auto Start List
[Root @ test1 local] #/sbin/chkconfig -- list
2) Add MySQL to the startup Service Group of your system.
[Root @ test1 local] #/sbin/chkconfig -- add MySQL
3) Delete MySQL from the startup Service Group.
[Root @ test1 local] #/sbin/chkconfig -- del MySQL

 

7. Change the MySQL directory

The default data file storage directory of MySQL is/var/lib/MySQL. To move the directory to/home/data, perform the following steps:

1. Create a data directory under the Home Directory
CD/home
Mkdir data

2. Stop the MySQL service process:
Mysqladmin-u root-P Shutdown

3. Move the entire/var/lib/MySQL directory to/home/Data
MV/var/lib/MySQL/home/data/
In this way, the MySQL data file is moved to/home/data/MySQL.

4. Find the my. CNF configuration file.
If my. for the CNF configuration file, go to/usr/share/MySQL/and find *. copy one of the CNF files to/etc/and change it to my. CNF. The command is as follows:
[Root @ test1 MySQL] # cp/usr/share/MySQL/my-medium.cnf/etc/My. CNF

5. Edit the MySQL configuration file/etc/My. CNF.
To ensure that MySQL works properly, you must specify the location where the mysql. Sock file is generated. Change socket =/var/lib/MySQL. Sock to/home/MySQL. Sock. The procedure is as follows:
VI my. CNF (use the VI tool to edit the my. CNF file and find the following data to modify)
# The MySQL Server
[Mysqld]
Port = 3306
# Socket =/var/lib/MySQL. Sock)
Socket =/home/data/MySQL. Sock (add this line)

6. Modify the MySQL STARTUP script/etc/rc. d/init. d/MySQL
Finally, you need to modify the MySQL STARTUP script/etc/rc. d/init. d/MySQL: change the path on the Right of datadir =/var/lib/MySQL to your actual storage path: Home/data/MySQL.
[Root @ test1 etc] # vi/etc/rc. d/init. d/MySQL
# Datadir =/var/lib/MySQL (comment this row)
Datadir =/home/data/MySQL (add this row)

7. Restart the MySQL service.
/Etc/rc. d/init. d/MySQL start
Or use the reboot command to restart Linux.
If it works properly, it will succeed. Otherwise, check again against the previous seven steps.

 

 

 

VIII. Common MySQL operations

Note: Each Command in MySQL must end with a semicolon.

1. display the database
Mysql> show databases;
+ ---------- +
| Database |
+ ---------- +
| MySQL |
| Test |
+ ---------- +
2 rows in SET (0.04 Sec)
MySQL has just been installed with two databases: MySQL and test. The MySQL database is very important. It contains MySQL system information. We change the password and add new users. In fact, we use the relevant tables in this database for operations.

2. display tables in the database
Mysql> use MySQL; (open the database. to operate on each database, open the database, similar to FOXPRO)
Database changed

Mysql> show tables;
+ ----------------- +
| Tables_in_mysql |
+ ----------------- +
| Columns_priv |
| DB |
| Func |
| Host |
| Tables_priv |
| User |
+ ----------------- +
6 rows in SET (0.01 Sec)

3. display the data table structure:
Describe table name;

4. display the records in the table:
Select * from table name;
For example, the user table records in the MySQL database are displayed. All users who can operate on mysql users are in this table.
Select * from user;

5. database creation:
Create Database database name;
For example, create a database named aaa
Mysql> create databases AAA;
6. Create a table:
Use Database Name;
Create Table Name (field setting list );
For example, if you create a table name in the newly created AAA database, the table has four fields: ID (serial number, auto-increment), XM (name), Xb (gender), and csny (date of birth ).
Use AAA;
Mysql> Create Table Name (ID int (3) auto_increment not null primary key, XM char (8), XB char (2), csny date );
You can use the describe command to view the created table structure.
Mysql> describe name;

+ ------- + --------- + ------ + ----- + --------- + ---------------- +
| FIELD | type | null | key | default | extra |
+ ------- + --------- + ------ + ----- + --------- + ---------------- +
| ID | int (3) | pri | null | auto_increment |
| XM | char (8) | Yes | null |
| XB | char (2) | Yes | null |
| Csny | date | Yes | null |
+ ------- + --------- + ------ + ----- + --------- + ---------------- +

7. Add records
For example, add several related records.
Mysql> insert into name values ('', 'zhang san', 'mal', '2017-10-01 ');
Mysql> insert into name values ('', 'baiyun ', 'female', '2017-05-20 ');
The SELECT command can be used to verify the result.
Mysql> select * from name;
+ ---- + ------ + ------------ +
| ID | XM | XB | csny |
+ ---- + ------ + ------------ +
| 1 | Zhang San | male |
| 2 | Baiyun | female | 1972-05-20 |
+ ---- + ------ + ------------ +

8. Modify records
For example, change the date of birth of John
Mysql> Update name set csny = '2017-01-10 'Where XM = 'zhang san ';

9. delete records
For example, delete the records of Michael Jacob.
Mysql> Delete from name where XM = 'zhang san ';

10. Delete databases and tables
Drop database database name;
Drop table name;

 

 

 

 

 

9. Add mysql users

Format: grant select on database. * To username @ login host identified by "password"
Example 1: Add a user user_1 with a password of 123 so that he can log on to any host and have the permission to query, insert, modify, and delete all databases. First, use the root user to connect to MySQL, and then type the following command:

Mysql> grant select, insert, update, delete on *. * To user_1 @ "%" identified by "123 ";
In example 1, the added user is very dangerous. If you know the user_1 password, then he can log on to your MySQL database on any computer on the Internet and do whatever he wants. For the solution, see Example 2.

Example 2: Add a user_2 password of 123 so that the user can only log on to localhost, you can also query, insert, modify, and delete the database AAA (localhost refers to the local host, that is, the host where the MySQL database is located), so that the user knows the password of user_2, he cannot directly access the database from the Internet, and can only operate the AAA database through the MySQL host.

Mysql> grant select, insert, update, delete on AAA. * To user_2 @ localhost identified by "123 ";

If a new user cannot log on to MySQL, run the following command during logon:

Mysql-u user_1-p-h 192.168.113.50 (-H is followed by the IP address of the host to be logged on)

 

Note: (when using the MySQL front link)

 

--- Open a remote user that can act falsely:

Grant all privileges on *. * To user_name @ '%' identified by 'passwd'

-- Start a local user:
Grant all privileges on *. * To user_name @ 'localhost' identified by 'passwd'

Solution for MySQL 1130 connector to zookeeper

 

This error occurs when MySQL-front is used to connect to MySQL.
Error 1130: Host 192.168.88.160 is not allowed to connect to this MySQL Server

1. Change the table. It may be that your account is not allowed to log on remotely, but only on localhost. At this time, you only need the server on the localhost.ComputerAfter logging on to MySQL, change the "host" entry in the "user" table in the "MySQL" database and rename "%" from "localhost"

Mysql-u root-P

Mysql> use MySQL;

Mysql> Update user set host = '%' where user = 'root ';

Mysql> flush privileges;

Mysql> select 'host', 'user' from user where user = 'root ';

Now you can connect!

2. Authorization method. For example, if you want myuser to use mypassword to connect to the MySQL server from any host.

Grant all privileges on *. * To 'myuser' @ '%' identified by 'mypassword' with grant option;

If you want to allow myuser to connect to the MySQL server from a host whose IP address is 192.168.1.3, and use mypassword as the password

Grant all privileges on *. * To 'myuser' @ '192. 168.1.3 'identified by 'mypassword'

 

 

 

 

 

10. backup and recovery

1. Backup

For example, back up the AAA library created in the previous example to the back_aaa file.

[Root @ test1 root] # cd/home/data/MySQL (go to the database directory, this example library has been transferred from Val/lib/MySQL to/home/data/MySQL, see section 7 above)
[Root @ test1 MySQL] # mysqldump-u root-p -- opt AAA> back_aaa

2. Recovery

[Root @ test MySQL] # mysql-u root-p ccc <back_aaa

 

 

 

Note:

 

After installation, you may encounter: Manager of PID-file quit without updating file.

 

This is because

1. The original data file is not deleted

2. Set

And then execute the following command:
Shell> RM-RF/var/lib/MySQL
Then re-execute the following steps:
Shell> Cd MySQL
Shell> scripts/mysql_install_db -- user = MySQL
Shell> chown-r root.
Shell> chown-r Mysql Data
Shell> chgrp-r MySQL.
Shell> CP support-files/MySQL. Server/etc/init. d/MySQL
Shells> CP support-files/my-medium.cnf/etc/My. CNF
Shell>/etc/init. d/MySQL start

 

 

Can't connect to local MySQL server through socket '/var/lib/MySQL. SOC:

1. The my. CNF file is not configured.

2. the MySQL service is not started.

 

 

Reference: http://www.javaeye.com/topic/369148