Centos5.8Marvell88E8057 NIC driver cannot be installed.

Centos5.8Marvell88E8057 NIC driver cannot be installed. -- Linux general technology-Linux technology and application information. For details, refer to the following section. The centos5.8 Nic cannot be installed.
This is the NIC information seen through lspci
. 0 Ethernet controller: Atheros Communications Inc. AR242x/AR542x Wireless Network Adapter (PCI-Express) (rev 01)
. 0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10)
The wireless network card of the atheros can be used, but it must be configured with NetworkManage in the graphic interface (such as the automatic scanning under the win platform, then you can use your own password. The trouble is that you have to enter the password again every time you start the system. Otherwise, an error will be reported:
Error for wireless request "Set Mode" (8B06 ):
SET failed on device wlan0; Invalid argument.
Error for wireless request "Set Frequency" (8B04 ):
Invalid argument "Auto ".
Error for wireless request "Set Encode" (8B2A ):
SET failed on device wlan0; Invalid argument.

The problem now is that the wired network card 88E8057 cannot be loaded with a driver.
Run dmesg | grep eth. No information is displayed.

The driver is downloaded from the official Marvell website.

Ask the veteran to help solve the problem and ask for additional information.