first, the name of the experiment
of the Switch Telnet Remote Login Configuration
Ii. contents of the experiment
1. new Packet Tracer topology diagram
Configuring the Switch management IP Address
Switch (config) # int VLAN 1
Switch (config-if) # IP address **ip** **submask***
2. Configure User Login Password
Switch (config) # enable password ******* Set Password to enter privileged mode
Switch (config) # line vty 0 4
Switch (config-line) # password 5IJSJ
Switch (config-line) # Login
Third, the experimental process
switch_2960 1 units, 1 pcs for device interconnection
2. Configure the PC address, Gateway
3. Configure switch Management IP address, Configure user login password
4. Command
Pc:
192.168.1.2
255.255.255.0
192.168.1.1
pc Span class= "Fontstyle2" > terminal:
en
conf T
Inter vlan 1
IP address 192.168.1.1 255.255.255.0
No shutdown
Exit
Enable password 123456
Line vty 0 4
Password 5IJSJ
Login
End
Show run
pc CMD:
Ping 192.168.1.1
telnet 192.168.1.1
PASSWORD:5IJSJ
Enable
password:123456
Show runing Span class= "FONTSTYLE0" >
Iv. Results of the experiment
Chapter III Telnet Remote login configuration of switches