Computer Title examination Question Bank Internet module Operation Practice Simulation test (a)

1. Add a standard 56000 bps modem device connected to the COM1 port for the current computer, requiring that the current connected device not be detected.

Current interface: Start à control Panel

Method One:

Open the "Phone and adjust demodulator options" à "adjust demodulator" tab à "add" button à select "Do not detect my modem device ..." à next à model: Standard 56000 bps modem à next à selected port: Com1à next à complete

Method Two:

Add new hardware à next à select "Yes, I have connected this hardware" à next à list pull to the last select "Add New Hardware Device" à next à select "Install me manually select hardware from list (advanced)" À select "Modem" à next à select "Do not detect my modem device ..." à next à model: Standard 56000 bps modem à next à selected port: Com1à Next

2. Starting with the current interface, locate the appropriate settings screen in phone and modem options, turn on the device, turn off the speaker volume at dial-up, and set the modem rate to 57600b/s.

Current interface: Start à control Panel

Open the "Phone and adjust demodulator options" à "adjust demodulator" tab à select Modem à "properties" button à "general" tab à device usage: Use this device (enable) à "modems" tab à Speaker Volume: off à maximum port speed: 57600à OK

3. From the current interface start with the mouse operation, in the phone and modem options, stop the current modem the use of this device.

Current interface: Start à control Panel à open "phone and adjust demodulator options"

Adjust demodulator tab à-select the modem à "properties" button

General tab à device usage: Do not use this device (deactivate) à ok

(Note: Please add a modem after this problem, model optional, in order to practice the following topics)

4. Add a modem to your computer with add hardware, and its driver location is G:\MODEM\TEM5628PF\W2K&WINXP.

Current interface: Start-Control Panel (this question is based on the 26-page picture, not the actual operation)

Add Hardware-next-yes, I've connected this hardware-add new hardware device-Install I manually select hardware from list-modems-next-default does not check my modem-next-Install from list or specified location (advanced)-tick "include this location in search" -Browse button-Find "G:\modem\tem5628pf\w2k&winxp"-ok-next-finish

5. To establish a connection to the Internet through the modem, the phone number is: 163000, the user name is: 1111, the password is: 666666, the connection is named: Link4, set up the process from the desktop to this connection shortcut, the rest is the system default settings.

Current interface: Control Panel-Network connection

Left network task: Create a new connection (or file-new connection) next à connect to internetà manually set up my connection à dial-up modem connection Àisp name: link4à Phone: 163000à username: 1111; password 666666 ; Confirm Password 666666à Select "Add a shortcut to this connection on the desktop" à finish

6. Create a "Connect to the Internet" dial-up connection, which is connected with a dial-up modem, the connection name created is "My connection", the phone number to be unplugged is 16900 (assuming an internal phone connection), the username and password are user (other settings default).

Current interface: Control Panel-double-click to open Internet Options

Method One:

Connection tab-add-dial to private network-phone: 0,16900-Connection Name: My connection-complete-username: user-Password: user-OK

Method Two: "Connect" tab à "establish connection" button à next à connect to internetà manually set up my connection à dial-up modem connection Àisp name: My connection à phone number: 0,16900à username: User; password: users; Confirm Password: userà complete

(Note: You can delete this dial-up connection called "My Connection" after you are done so that the exercises below)

7. Starting from the current interface, find the corresponding settings interface, set the corresponding options, so that the system for all users logged into the computer automatically save the dial-up connection when the user name and password.

Current interface: Start à control Panel à network connection

Select Dial-double-click-Select Save user name and password for the following user-Cancel

8. Starting from the current interface, set the appropriate settings to the corresponding property settings screen, and disable the display of the connection icon in the lower right corner of the taskbar when the dial-up is switched on.

Current interface: Start à control Panel à network connection à right click "link4" à property

"Properties" button à "general" tab à cancel "show icon in notification area after connection" à ok

9. Starting with the current interface, for dial-up connection "LINK4", use the modem (standard 56000bps) to set the maximum speed 921600b/s, and enable modem hardware compression to turn on the speaker.

Current interface: Start à control Panel à network connection

Method One:

Double-click the "Link4" à "properties" button under dialing à "general" tab à "configure" button à maximum speed: 921600à Select "Enable modem compression" à select "Enable the tuning Demodulator speaker"

Method Two: Right click on the "Link4" à property à "general" tab à "configure" button à maximum speed: 921600à Select "Enable modem compression" à select "Enable tuning Demodulator speaker"

10. Start the operation from the current interface, complete the relevant property settings, the connection will not show the progress of the connection, and do not prompt phone number, if the system is idle for 10 minutes, so that automatically hang up the dial-up connection, and cancel redial.

Current interface: Start à control Panel à network connection à "Link4 Properties" dialog box

Options tab à cancel "Show connection progress on connection" à cancel "prompt phone number" à idle time before hanging up: 10à cancel "redial" à ok

For more information, please click here: http://www.zkypgw.com/details/61385.html