Design workstation created with Liquid Cooling Technology (figure) (1)

Imagine, if you are an animation special effect designer and you are surrounded by dozens of workstations, there is no noise, and you are not feeling sultry, the ability to "calmly" and concentrate on your inspiration and complete your work! -- In the past, IT may only exist in your imagination, because the heat dissipation and noise of IT facilities have always been a conflict, especially for technicians who use high-configuration and High-Power workstation products, it is a luxury to work in a comfortable and quiet environment without noise. However, with the emergence of HPZ400 and HPZ800 workstation products equipped with the latest Liquid Cooling Technology, this luxury has become a reality!

Perfect Combination of heat dissipation and noise

Looking back at the development history of IT facilities, "heat sink" and "noise" seem to be "friends" that can never be reconciled ". With the improvement of system functions, especially the rapid rise in the power of core components such as CPU and video card, the calorific value also increases, and the demand for heat dissipation is constantly upgraded. For Heat Dissipation, or the use of memory, graphics card PCI device and hard disk power three ways of heat dissipation, or increase the heat sink, fan speed and other methods. Although the heat dissipation is solved, the noise and energy consumption also increase ...... With the upgrading of machines, the contradiction between "Heat Dissipation" and "noise" cannot be solved. In the past, this may be just a small problem. However, nowadays, more and more industries have begun to apply high-end workstation products, especially in Engineering Drawing, film effects, and other industries, usually more than a dozen or even dozens of machines operate simultaneously, and the environmental problems caused by heat dissipation and noise become more and more serious.

In response to the above problems, HP suddenly used the "Liquid Cooling Technology" to successfully solve the "Heat Dissipation" and "noise" problems. To put it simply, the liquid cooling system (LCS) is a new cooling and cooling system developed using the principle that the liquid's thermal capacity is several thousand times higher than that of the air, he uses a new heat dissipation system consisting of a liquid and a radiator with a large surface area. The heat load capacity is 5 times that of the air cooling system. After tests, the use of liquid cooling technology for machines quickly "back to hot", while also greatly reducing the noise of the workstation. Data shows that Z800 and Z400 hosts with liquid cooling are used to effectively control noise. The Z400 noise is only about 30 decibels during the 100% load process, and the system can be reduced to about 24 decibels when idle. In addition, the temperature of the processor can be reduced by about 3 ℃. This will provide a strong guarantee for the continuous stability of the workstation and hours.

HPZ400 Liquid Cooling module, including hot plate, liquid circulation pump, heat exchanger and Fan

HPZ800 dual Xeon workstation Liquid Cooling module, including two hot plate, liquid pump, Fan and radiator