Early Adopters RHEV3.0--RHEV-H Installation

Installation process: first burn the rhevh-6.2-20111108.iso disc into the optical drive, and set the optical drive to start. After the rev is started, you will first see the rev welcome page. After you press enter, read: early adopters of RHEV3.0-concepts (refer to download RHEV3.0) http://www.linuxidc.com/linux/2011-12/50589.htm rhefresh v3.0--rhev-m

Installation Process:

First burn the rhevh-6.2-20111108.iso CD into the optical drive, and set the Optical Drive boot.

The welcome page of rev appears first

Press ENTER

Related reading:

Rev 3.0 concepts (with RHEV3.0 download) http://www.linuxidc.com/Linux/2011-12/50589.htm

Early Adopters rev 3.0-RHEV-M installation http://www.linuxidc.com/Linux/2011-12/50590.htm

Early Adopters rev 3.0-browser logon Management Center http://www.linuxidc.com/Linux/2011-12/50592.htm

The interface options include:

Install or Upgrade

Install or Upgrade with serial console

Reinstall

Reinstall with serial console

Uninstall

Boot from local driver

The installation disc of the rhevl provides three functions:

1. Install/upgrade (the original configuration is basically retained)

2. reinstall (delete the original configuration)

3. Uninstall

Press enter to display the Red Hat Enterprise Virtualization Hypervisor 6.2 Beta.

The next step will let you choose to start the rhevl from that disk.

After Continue, select the hard disk to which the rhevl is installed.

Then prompt: Require a password for local console access:

This is the logon password of the local admin. It is recommended that the password contain uppercase and lowercase letters, numbers, and special characters.

After the password is set, the system starts partitioning, creating a file system, and installing bootloader.

The following figure is displayed:

After the restart, the interface is as follows:

Note: The Login User Name here is admin

The password is the password you just set.

After installation is complete, you can log in and configure it.

The logon interface is as follows:

On this page, you can perform four operations: Lock, exit, restart, and shutdown.

When the device is installed, the network is not connected by default. You need to set the network