Dell PowerEdge r210 into BIOS Modified disk controller (SATA Controller) interface mode

Dell PowerEdge r210 into BIOS Modified disk controller (SATA Controller) interface mode

Press F2 after power on to enter the BIOS settings, such as:

BIOS Setup Main interface:

Use the up and down keys to move the cursor to "SATA Controller" and press ENTER to enter the interface mode setting.

Use the up and down keys to move the cursor to "SATA Controller", use the left and right keys to modify the interface mode, including the optional: Off,ata mode,ahci mode,raid mode.

Press ESC when the settings are complete, save and exit.

Note: When you restart the load configuration item after exiting, the user is prompted to confirm the modification, which requires two consecutive Y-key confirmations, such as:

Copyright NOTICE: This article for Bo Master original article, without Bo Master permission not reproduced.

Dell PowerEdge r210 into BIOS Modified disk controller (SATA Controller) interface mode