This blockage will cause the ink droplets to be small or gush out of the ink has obvious bifurcation phenomenon, so that the ink drop on the paper coverage is not enough, but also will cause the ink to fly oblique, the positioning of the paper on the offset, so that the printed artwork let people feel coarse particles. A serious blockage results in a lack of color. In addition, the purpose of the installation of permanent chip is to save ink, and Epson printer boot does not clean the nozzle, causing plugging head and then desperately clean, not only can not save ink, but also cause more paper and ink waste.
------Even the ink system makes people happy and worrying.
Even for the system because of its low price, in the market quite a certain user base. The system first appeared at the end of 2002, after 2003 of development, in 2004, the road. The average home user because the monthly consumption of ink is not very large, usually do not use the system. Some profit-based business output users, such as printing companies, advertising companies, because of the monthly print volume, as a small and medium-sized enterprises and particularly want to control costs, so it will be on the system for a single clock. In general, the size of these enterprises will be several people to about 20 people. The company will generally use two or three Epson printer, the monthly consumption of seven or eight sets or so. With the use of ink system, each month can help them save a lot of money to buy cartridges.
Second, as a plug-in products, even for the ink system to change the structure of the Epson printer, Epson printer functions can not be fully implemented, resulting in a failure, such as serious plug-like. Because the system is a plug-in device, through the long pipeline to convey ink, it is easy to have air into the bubble, in addition to non-genuine ink due to the production conditions are not guaranteed, easy to mix with impurities, these are the culprit that caused the plug.
First, the current even for ink system technology is not mature, product quality is uneven, some small and medium-sized dealers in the interests of the operation of some non-brand products, these products are three no products, no factory name on the packaging, the site, and so on, so the quality of ink can not be guaranteed, This is why users feel that even ink-printed colors are not as good as those printed with original ink.
In addition, due to the pressure imbalance in the supply system will also cause ink leakage from the print head to the waste ink pad, the long-term in this state of ink is more and more and leaked out even to the table. If these waste ink flow to the Epson Printer Power Board or control Board, will cause a short circuit board, resulting in damage to the Epson printer. Even if the waste ink does not overflow, when the Epson printer waste ink Over the case, the evaporation of waste ink pad will also be on the Epson Printer Circuit board, action mechanism and even the nozzle damage. Conversely, the use of Epson printer Manufacturers original ink, power-on flushing consumes less ink, the waste ink pad is full and cause the problem of ink leakage will not appear. Even if the long-term large-volume printing caused the waste ink pad saturation, the machine will prompt the alarm, the user just to the repair station to replace the new waste ink pad can be solved.
Third, but also for the ink system users The most headache problem is that the waste ink pad easily full. As you know, Epson printer if not used, the ink in the nozzle will inevitably be due to the evaporation of water and viscosity increased or dried up caused by clogging, so when the power-on, Epson printer nozzle is automatically cleaned. The use of connecting system, because of the long pipeline transmission, in the cleaning of the nozzle, greatly increased the production of waste ink, resulting in the waste ink pad easily full. Another plug after the need for a large number of ink cleaning nozzle, more so that the waste ink pad overwhelmed.
So what is the difference between the supply system and the original cartridge, and why does it bring so much trouble to people? Do consumers succumb to low prices or are they honest about print quality?
http://www.bkjia.com/PHPjc/318556.html www.bkjia.com true http://www.bkjia.com/PHPjc/318556.html techarticle this blockage will cause the ink droplets to be small or spray out of the ink has obvious bifurcation phenomenon, so that the ink drop on the paper coverage is not enough, but also cause the ink to fly oblique, on the paper ...
