There are three ways to enter the BIOS:
1.> boot, press F2 to enter the BIOS for some boot disk options such as operation. However, it is difficult to start the first time press F2 successfully entered the BIOS,
2.> Change the wait time before VMware enters the BIOS, it is easy to press F2 into the BIOS.
Modification Method:
Normal Right-click:
What we need is to hold down the option key and right-click:
Open the config file to add a sentence:
Bios.bootdelay = "3000"
Note: This method is also available for VMware Workstation under Windows.
This method refers to: File:///Users/licht/Documents/vmware%20fusion%20 into the%20bios%20-%20zhaolong_chn log%20-%20 netease blog. html
3.> before powering on the corresponding virtual machine settings, start the disk, and reach the following interface.
Press the OPTION key.
Then you'll see "reboot" turned into "reboot to firmware"
Click to go directly to the BIOS interface.
VMware Fusion enters BIOS