Configuration of Huawei Firewall:
操作步骤:
Prepare the desired configuration first.
1. Configure IP
Client3
ip:192.168.1.1
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Server3
ip:100.0.0.1
Subnet Mask: 255.255.255.0
Gateway: 100.0.0.254
2. Add a port on the Cloud (CLOUD2) (no connection is added to the port)
3. Connecting lines
4. Enter the firewall FW3 set a 8~16 bit password
5. View the IP of the firewall in the configuration file
Display Current-configuration
6. Then set the IP of the physical network card to the same network segment on the physical machine.
7. Ping the IP of the firewall on the physical machine
8. Open the Web in the firewall
web-manger enable
9. Open the browser input firewall IP Access page Enter the user name and password (username: admin password: [email protected])
Then set the initialization password
Re-enter with new password
Enter the system
10. Configure the Port
首先配置内网的接口GE1/0/0(此接口是内网,安全区域是trust)
Configuring security zones and gateways for interfaces
Then, to ping the gateway, you must enable service management
Then test on the client1 if you can ping the
Then configure the security zone and gateway for the GE1/0/1 interface and enable ping for access management (this interface is extranet, security zone is Untrust)
Test on the Server1
11. To access the extranet to open the service on the Server1 (HTTP and FTP services are turned on here)
Then build a security policy on the Web interface of the firewall
Input source security zone and destination security zone (can also write an allow all)
Select the Allowed apps (this option allows all)
12. Verification, testing
用内网访问外网
You can also grab a bag to view it
How firewalls are configured in the Web interface