The following describes how to automatically mount windows partitions under ubuntu5.10: after each boot, the system automatically mounts windows partitions. (Take my system as an example) first, run the command on the terminal: sudomkdir/mnt/winCsudomkdir/mnt/winDsudomkdir/mnt/winE to create three Mount directories to Mount CDE disks separately. Run sudofdisk-l to view the disk
The following describes how to automatically mount windows partitions under ubuntu5.10: after each boot, the system automatically mounts windows partitions. (Take my system as an example)
Run the following command on the terminal: sudo mkdir/mnt/winC
Sudo mkdir/mnt/winD
Sudo mkdir/mnt/winE
Create three Mount directories to mount the c d and E disks respectively.
Run
Sudo fdisk-l
View the disk partition information:
Disk/dev/hdb: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065*512 = 8225280 bytes
Device Boot Start End Blocks Id System
/Dev/hdb1*1 1275 10241406 7 HPFS/NTFS
/Dev/hdb2 1276 3872 20860402 + f W95 Ext 'd (LBA)
/Dev/hdb3 3873 4865 7976272 + 83 Linux
/Dev/hdb5 1276 2550 10241406 7 HPFS/NTFS
/Dev/hdb6 2551 3825 10241406 B W95 FAT32
/Dev/hdb7 3826 3872 377496 82 Linux swap/Solaris
You can see from the above information
Hdb1 is a drive C under my windows
Hdb5 is my D drive in windows
Hdb6 is an E drive under my windows
Then run sudogedit/etc/fstab
Open the configuration file and enter the following red content in the original content:
#/Etc/fstab: static file system information .#
Proc/proc defaults 0 0
/Dev/hdb3/ext3 defaults, errors = remount-ro0 1
/Dev/hdb7 none swap sw 0 0
/Dev/hdc/media/cdrom0 udf, iso9660user, noauto 0 0 0
/Dev/fd0/media/floppy0auto rw, user, noauto0 0
/Dev/hdb6/mnt/winE vfat utf8, umask = 0000 0
/Dev/hdb5/mnt/winD ntfs nls = utf8, umask = 000 0 0
/Dev/hdb1/mnt/winC ntfs nls = utf8, umask = 000 0 0
Save the file reboot.
Note:/dev/hdbx is the partition under windows to be mounted. Note that I am using hdb, you may also be using hda, where/mnt/winx is the directory to be mounted. here I use it to mount the windows C D edisk. Vfat indicates the fat32 file format. ntfs indicates utf8 after ntfs format. umask indicates the permission of the file directory. In short, there are three 0 s, and the latter two are both 0.
Attachment: manual mounting
Fat format:
Mount-t vfat-o iocharset = utf8/dev/hdb6/mnt/winE
NTFS format:
Mount-t ntfs-o nls = utf8/dev/hdb5/mnt/winD
Uuid is currently used.
Obtain the UUID of the specified device:
If you know a device name and want to confirm its UUID, for example, if you want to confirm that your/etc/fstab UUID is correct, you can use the vol_id command:
Ubuntu # vol_id-u/dev/sdb1
C73a37c8-ef7f-40e4-b9de-8b2f81038441
List UUID of devices in the system
If you use the latest ubuntu, you can use the blkid command to list the UUID of all storage devices in the system.
Ubuntu # blkid
/Dev/sda1: UUID = "2220CF8220CF5B83" TYPE = "ntfs"
/Dev/sda2: UUID = "48E81F29E81F14B2" LABEL = "DRIVE-D" TYPE = "ntfs"
/Dev/sdb1: UUID = "c73a37c8-ef7f-40e4-b9de-8b2f81038441" SEC_TYPE = "ext2" TYPE = "ext3 ″
/Dev/sdb5: TYPE = "swap" UUID = "abe7529e-dcd5-4afc-b714-05569dbcd30b"
/Dev/sdb6: UUID = "f34c8c7c-a020-4a14-8c97-257180240250" SEC_TYPE = "ext2" TYPE = "ext3 ″
/Dev/sdb7: UUID = "8fa274ca-5b22-411f-b51277469c1f276da" SEC_TYPE = "ext2" TYPE = "ext3 ″
/Dev/sdc1: UUID = "1e36f323-c4e5-4f55-ba0a-838643550bf9" TYPE = "ext3" SEC_TYPE = "ext2 ″
/Dev/sdc2: UUID = "83aa92e4-4df4-4aab-80f3-9bbb447e0459" TYPE = "ext3" SEC_TYPE = "ext2 ″