How to Create a LINUXPCCCcam server within one hour using ClarkConnect

How to Create a LINUXPCCCcam server-Linux Enterprise Application-Linux server application within one hour using ClarkConnect is described below. How to setup Linux PC CCcam server under 1 hour with ClarkConnect This tutorial helps you to setup a Linux PC CCcam server under 1 hour, even for users with no Linux knowledge.

How to Create a linux pc CCcam server and use ClarkConnect within one hour is a mentor to help you build a Linux PC CCcam server within one hour, and even users have no knowledge of LINUX.

We need some old working PC. Hardware: Pentium 3 or Amd 600 Mhz and up, 256 mb ram, from 5 gb HDD and up, Networkcard, and a simple 1 mb videocard.

We need some old computers, hardware: P3 or AMD600MHZ or above, with 256 memory. Hard drive and network card with 5 Gb or above, 1 MB graphics card.
Intro:
Introduction:
Out there are running Linux distro's. With most of them you can build a good share server, but we use today
LINUX has many release kits, and most of them can be used to create a good sharing server, but today we use:
"ClarkConnect ".
"ClarkConnect ".
What is ClarkConnect you ask !?, ClarkConnect is a powerful and affordable Internet server and gateway solution based
What is ClarkConnect? ClarkConnect is a powerful, load-capable Internet server and basic gateway resolution.
On RedHat. http://www.clarkconnect.com/
In RedHat. http://www.clarkconnect.com/
Is it stable !? Yes it is very stable and works almost perfectly with CCcam.
Is it stable? Yes, it is very stable and works almost perfectly on CCcam
No Graphical User Interface (GUI) Doesn't the Dashboard over what you can monitor add new modules etc in your server
No graphic interface except Dashboard, You can monitor the addition of new components etc in your server
Easy and comfortable to use.
Easy to use and comfortable
OK lets start now.
Okay. Let's start now.
1: Download and burn it to a CD. Link for ClarkConnect iso:
Step 1: Download and burn ClarkConnect iso to a CD disk
Ftp: // community-42: hiptop@ftp.cl... mmunity-4.2.SP1.iso
If you do not know how do burn it to CD here is help for that too:
If you don't know how to record the CD, this is helpful.
Http://www.clarkconnect.com/help/flash/install_burn.html
2: In install mode please select language what you want to use. then select install from "CDrom" then "standalone and use manual IP table. from modules select only "FTP" other stuff from modules you do not need for share server! Select automatic partition.
Step 2, select the language you want to use in the installation mode, then choose to install from the CD-ROM, select a single machine and the user manually set the IP address, from the component only select "FTP ", you don't need anything else in the component, for the shared server. Select automatic partitioning.
3: Now if ClarkConnect is installed and you used manual IP table then you can unplug monitor and keyboard from PC
You do not need them anymore.
If you used dhcp ic dhcp then log to server from current monitor and keyboard to know what IP your server has.
Use command: ifconfig
Now you see your server IP, unplug monitor and keyboard from PC.
Step 3: If ClarkConnect has been installed and you have manually set an IP address, you can unplug your monitor and keyboard.
You no longer need them.
If you are using the IP address assigned to the server through automatic DHCP, you can know the IP address of the server through the current display and keyboard,
Command: ifconfig
Now you see the IP address of your server, without the display or keyboard
4: Now open from your regular PC webbrowser and add such line:
Https: // 192.168.1.15: 81/
Of course you need put there your server IP! And you are on Dashboard.
Step 4: Open your normal pc web browser and add the following lines
Https: // 192.168.1.15: 81)
Of course, you need to enter your server IP address on your Dashboard
5: Open from dashboard "Account Manager" and "Users". Create new user lets say "blabla" there and put "xxxxx"
Password.
Step 5: Open "Customer Management" and "user" from the dashboard software, create a new user "blabla", and enter the password xxxx
6: Open from dashboard "Software" and "FTP" and set:
Step 6: Open the dashboard software "FTP" and "set"
Status? Running
Status-run
On boot? Automatic
Start-automatic
If that is done close the dashboard
Close the dashboard
7: Download CCcam pack and totalcommander FTP client software.
U Can Find Cccam Pack In The Forum
Http://www.ghisler.com/
Step 7: Download The CCcam pack and totalcommander FTP client software
Install to your regular PC totalcommander it is trial. And unpack CCcam and take out from there CCcam. x86 and
CCcam. cfg.
The totalcommander installed on your normal computer is a trial version. Decompress CCcam and retrieve the CCcam. x86 and CCcam. cfg files.