How to create a website with different ports in the wdcp background

In the wdcp background, how to create a website with different ports for Access starts at wdcp2. website access with different ports can be created, such as. Generally, the port of the website is 80 by default, therefore, you do not need to specify it at ordinary times. all accesses are 80, but sometimes you need to use a specific port or use... In wdcp How to create a website accessed through different ports in the background
At wdcp2, website access through different ports can be created, for example ,.

Generally, the port number of the website is 80 by default, so you do not need to specify it at ordinary times. all accesses are 80.
However, sometimes you need to use a specific port or test the IP address, you can use IP + Port for testing, instead of using a domain name.

If you want to use a domain name, you can also see here http://www.wdlinux.cn/bbs/thread-930-1-1.html

Here only describes how to use multiple ports
Step 1: Set the port to be used
Set the corresponding port in system settings, as shown in figure



OK
Open it in IE, as shown in figure


This completes

Similarly, access from other ports can be added.

If the access fails, check whether the port is enabled and whether the firewall is enabled.
If
1 Check Port
System Management Port Management
Check whether there are related ports:


The port is normal.

2. check the firewall
Security Management (iptables)
For example



If there is no 81, add one, as shown in figure


In this way, the access should be normal.

To resume next time, save the firewall rules you just set, as shown in figure



In this way, the next restart will allow normal access.

This article is taken from the wdlinux Forum!