Install and configure minicom in Ubuntu and transmit files through minicom

Operating System: Ubuntu10.04 Cross Compiler: arm-linux-gcc-4.1.1 1, installation configuration minicom1, installation minicomlingd @ ubuntu :~ $ Sudoapt-getinstallminicom2, configure minicomlingd @ ubuntu :~ $ Sudominicom-s has the following operating system: Ubuntu 10.04 Cross Compiler: arm-linux-gcc-4.1.1
1. install and configure minicom1. Install minicomlingd @ ubuntu :~ $ Sudo apt-get install minicom2, configure minicomlingd @ ubuntu :~ $ Sudo minicom-s has the following configuration interface: + ----- [configuration] ------ + | Filenames and paths | File transfer protocols | Serial port setup | Modem and dialing | Screen and keyboard | Save setup as dfl | Save setup .. | Exit from Minicom | + -------------------------- + Select Serial port setupThe following options are displayed: + callback + | A-Serial Device:/dev/ttyS0 | B-Lockfile Location:/var/lock | C-Callin Program: | D-Callout Program: | E-Bps/Par/Bits: 115200 8N1 | F-Hardware Flow Control: No | G-Software Flow Control: no | Change which setting? | + ----------------------------------------------------------------------- +
Enter the corresponding letter to enter the corresponding option. Set the value of option A to/dev/ttyS0 to serial port 1, set Option E to 115200, and set option F to NO (Please configure according to the actual situation ).
Sets the default upload/download directory, Select Filenames and pathsThe following options are displayed: + ------------------------------------------------------------------------- + | A-Download directory:/home/lingd/arm/download | B-Upload directory: /home/lingd/arm/upload | C-Script directory: | D-Script program: runscript | E-Kermit program: | F-Logging options | Change which setting? | + ----------------------------------------------------------------------- + Note: The files sent from the Development Board to the pc will be saved in the directory set by Download directory, while the files to be downloaded from the pc to the Development Board will be saved in the directory set by Upload directory.
After the settings are complete, Select "Save setup as dfl ",Save as default settings.
Select "Exit" to go to the main interface of Minicom: Welcome to minicom 2.4.
OPTIONS: I18n Compiled on Jan 25 2010, 06:49:09. Port/dev/ttyS0
Press CTRL-A Z for help on special keys Press Ctrl-A, then Press z, can get the help information of minicom CTRL-A Command Welco + --------------------------------------------------------------------- + | Minicom Command Summary | OPTIO | Compi | Commands can be called by CTRL-A | Port | Main Functions Other Functions | Press | Dialing directory .. D run script (Go ).... G | Clear Screen ....... C | Send files ......... S Receive files ...... R | cOnfigure Minicom .. O | comm Parameters .... P Add linefeed ....... A | Suspend minicom .... J | Capture on/off ..... L Hangup ............. H | eXit and reset ..... X | send break ......... F initialize Modem... M | Quit with no reset. Q | Terminal settings .. T run Kermit ......... K | Cursor key mode .... I | lineWrap on/off .... W local Echo on/off .. E | Help screen ........ Z | Paste file ......... Y | scroll Back ........ B | Select function or press Enter for none. | Written by Miquel van Smoorenburg 1991-1995 | Some additions by Jukka Lahtinen 1997-2000 | i18n by Arnaldo Carvalho de Melo 1998 | + keys + CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.4 | VT102 | Offline
Among them, we use CTRL-A s to send files to the Development Board; and use CTRL-A r to receive files on the Development Board
2. Install lrzszlrzsz is a unix communication package providing the XMODEM and ymodem zmodem file transfer protocols. lingd @ ubuntu: ~ for the pc :~ $ Sudo apt-get install lrzsz