Install and install a windows Network Printer on SLES10

SLES10 installation and installation of windows Network Printer-Linux Enterprise Application-Linux server application information, the following is a detailed description. Premise: the printer is installed on a windows host in the LAN. Host Name: USER, IP Address: 192.168.4.252. SLES10 is installed with the cpus-drivers, manufacturer-PPDS, and smppd software packages.

1. log on to SLES10 as the root user, edit/etc/hosts, and add the IP address and Host Name of the windows Print Server. Then run yast.

2. Select hardware and printer.

3. In the pop-up dialog box, select "add", select "Network Printer", and then select "print through SMB network server"

4. Enter relevant content in the dialog box. (The specific content should be set based on the actual situation of the windows host)

Working Group: workgroup printer HOST: USER
Remote Queue name: Maid (printer sharing name)
Username: guest.
After the input is complete, Run "test remote SMB access". If the setting is successful, the message "printing the server is accessible" appears"

5. Click "Next ".

6. Select the printer model.

Set successfully.